800mm Solar Powered Outdoor Bollard Post Light - Loops - Black

The duration of light on a full charge depends on the brightness setting used and the amount of sunlight received. Generally, it is designed to operate throughout the night, especially on lower brightness settings.

The IP44 rating means the light is protected against solid objects larger than 1mm (like wires) and is protected against water splashes from any direction. This makes it suitable for outdoor use.

While the light is solar-powered, it requires a significant amount of direct sunlight to charge effectively. Performance will be significantly reduced in areas with limited or indirect sunlight.

The brightness settings are typically adjusted by repeatedly pressing the push-on/off switch. Each press cycles through the available brightness levels (30lm, 130lm, 320lm) and off.

It features an integrated 5.8W LED (SMD 3528) that produces 3000K warm white light.

Please refer to the product packaging or manufacturer's documentation for specific warranty information, as this can vary.

Ensure the solar panel is clean and receiving direct sunlight. Check that the unit is switched on via the push button. Verify that the area is dark enough for the light sensor to activate.

Clean the solar panel. Ensure the panel is not obstructed by shadows from trees or buildings during daylight hours. Move the light to a location with more direct sunlight if possible.

Ensure the motion detection mode is enabled via the push switch. Check for any obstructions blocking the sensor. The effective range is up to 8 meters.

This may indicate a low battery charge. Allow the unit to charge fully in direct sunlight for a full day. If the issue persists, the battery may need replacement (consult manufacturer).