Setup, Compatibility & Care
This oil is compatible with all makes of 4-stroke bikes, both carburetor or fuel injected where JASO MA or MA2 are recommended. Ensure that your motorcycle's engine is compatible with 5W-40 viscosity oil. Always refer to your motorcycle's owner's manual for specific oil requirements and change intervals. Follow these steps for an oil change:
- Warm up the engine.
- Place a drain pan under the drain plug.
- Remove the drain plug and allow the old oil to drain completely.
- Replace the drain plug and tighten it to the manufacturer's specifications.
- Remove the oil filter and replace it with a new one.
- Pour the correct amount of Castrol Power 1 Ultimate 5W-40 into the engine.
- Check the oil level using the dipstick and add more if necessary.
- Start the engine and let it run for a few minutes, then check for leaks.
Dispose of used oil responsibly at a recycling center.