Fixman Concrete Masonry Bolts - M12 X 100mm - 10pk
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is designed for users who need a reliable and easy-to-install fixing solution for concrete, brick, and other masonry materials. The Fixman Concrete Masonry Bolt offers a quick and effective way to secure items like racking, handrails, and machinery. However, note that these bolts are designed for specific applications and material types, so always ensure compatibility before use.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 513133 |
| Brand | Fixman |
Extended Product Information
FAQs
What materials can these bolts be used in?
These bolts are suitable for use in concrete, brick, hollow block, and similar masonry materials.
What size drill bit do I need?
You will need a drill bit that matches the diameter of the bolt (M12) and the specific installation requirements. Refer to product specifications.
Can I use these bolts outdoors?
Yes, these bolts are suitable for both indoor and outdoor applications.
How do I remove the bolts?
Unscrew the bolt using a wrench or appropriate tool.
What is the recommended torque?
Specific torque recommendations depend on the material and application. Refer to product specifications for details.
What if the bolt is too short?
If the bolt is too short, it will not fully engage. Use a bolt of the correct length for the application and material.
How do I clean the bolts?
Wipe the bolts with a clean cloth.
Troubleshooting
Bolt doesn't tighten.
Ensure the hole is the correct size. Check for debris or damage to the threads. If necessary, re-drill the hole and try again.
Bolt feels loose after tightening.
Check the material for crumbling. Ensure the correct bolt length is used. If the material is compromised, consider using a different fixing method.
Pros and Cons
Pros
- Easy to install, saving time and labor.
- Suitable for both indoor and outdoor applications.
- Non-expansion design allows for close-to-edge fixing.
- Durable and reliable hold in masonry materials.
- Versatile for various applications like handrails and racking.
Cons
- Requires pre-drilled holes for installation.
- May not be suitable for all types of masonry.
- Specific size (M12 X 100mm) limits application.
- Performance depends on correct hole size and material.
- Not recommended for applications requiring high load bearing capacity without proper assessment.
Setup, Compatibility & Care
Setup: Ensure you have the correct drill bit size for M12 bolts. Drill the hole to the recommended depth in the masonry material.
- Preparation: Identify the installation location and mark it.
- Drilling: Use a drill with an appropriate bit for the masonry material. Drill a hole that matches the bolt's diameter and depth requirements (refer to product specifications for precise measurements).
- Cleaning: Clear the drilled hole of dust and debris.
- Installation: Insert the bolt into the drilled hole and tighten with a suitable wrench or tool.
Compatibility: These bolts are compatible with concrete, brick, hollow block, and other masonry materials. Always verify the suitability of the material before installation.
Care: Regularly inspect the bolts for corrosion or loosening, especially in outdoor environments. If any issues are found, replace the bolts as needed.