Best current price£298.70from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£298.70Visit shop Blackmagic Design Mini Converter - Audio To Sdi 4K Active Video Conver
Visit shop4 offers from £298.70 - £358.44
View price history by clicking the chart icon.
The Blackmagic Design Mini Converter Audio to SDI 4K is designed for broadcast professionals, AV technicians, and video engineers who need to embed analog or digital audio into an SDI video signal. Its key benefit is seamless integration of professional audio sources with SDI workflows, supporting up to 4K resolutions. A potential caveat is the need for compatible audio input devices and SDI infrastructure.
| Model Part Number | CONVMCAUDS4K |
|---|---|
| Brand | Blackmagic Design |
No, the Mini Converter Audio to SDI 4K is designed specifically to embed analog or digital audio into an SDI signal. It does not de-embed audio.
It uses standard 1/4 inch (6.35mm) unbalanced TS or TRS connectors for both analog and AES/EBU digital audio inputs.
The converter supports video resolutions up to 3840 x 2160 (4K) at frame rates up to 30p for 6G-SDI.
Yes, it requires an external power supply which is typically included. The operating voltage is 31V and power consumption is approximately 8.4W.
It can embed either 4 channels of professional balanced analog audio or 8 channels of professional balanced digital AES/EBU audio.
It supports SD, HD, 3G-SDI, and 6G-SDI video standards.
The redundant SDI input provides automatic failover. If the main SDI input signal is lost, the converter will automatically switch to the signal on the redundant input to maintain signal continuity.
Verify that the audio source is connected correctly to the 1/4 inch audio inputs and is active. Ensure the audio input level is sufficient. Check that the correct audio input type (analog or AES/EBU) is selected or auto-detected by the converter.
Confirm that a valid SDI input signal is connected to the main SDI input. Check that the input SDI format is supported by the converter. Ensure the destination SDI device is properly connected and powered on.
Ensure the primary SDI input signal has completely dropped. Verify that the backup SDI source is active and correctly connected to the redundant input. The switchover is automatic when the primary signal is lost.
Check all BNC cable connections for security and integrity. Try using shorter, high-quality SDI cables. Ensure the power supply is stable and providing adequate power (31V).
Setup: Connect your professional audio source (analog or AES/EBU) to the respective 1/4 inch input terminals. Connect your SDI video source to the main SDI input and optionally, a backup SDI source to the redundant input. Connect the converter's SDI output to your destination SDI device (router, deck, or monitor). Power the converter using the provided power adapter.
Compatibility: The Mini Converter Audio to SDI 4K is compatible with SD (525i, 625i), HD (720p, 1080i, 1080p), 3G-SDI, and 6G-SDI video standards. It accepts balanced analog audio via 1/4" connectors and balanced digital audio (AES/EBU) via 1/4" connectors. Ensure your audio source and SDI destination devices support these formats.
Care: Keep the converter in a well-ventilated area to prevent overheating. Clean the exterior with a dry or slightly damp soft cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure all cable connections are secure but not overtightened. Operate within the specified temperature range of 0°C to 40°C (32°F to 104°F).
