E-Tech XHT Exhaust Extremely High Temperature Spray Paint - Blue 400ml - E-Tech - XHT007
E-Tech XHT Exhaust Extremely High Temperature Paint - Blue 400ml
The E-TECH XHT paint formula has ...E-Tech XHT Exhaust Extremely High Temperature Paint - Blue 400ml
The E-TECH XHT paint formula has been developed using the latest advances in paint technology. Designed for surfaces that are exposed to extremely high temperatures, this paint will coat, protect and enhance wherever it is applied.
Suitable for applications such as: Automotive, Domestic, Industrial, Marine, Motorsport.
Colour: Blue
Developed using the latest advances in paint technology, XHT is designed for use on surfaces that are exposed to extremely high temperatures. Ideal for engine blocks, rocker / cam covers, exhausts and manifolds giving a long lasting high quality finish with strong adhesion.
--Extremely high temperature rating, ideal for engine components
--Gives a long lasting great finish with no need for primers
--Easy to apply aerosol.
Available in a range of colours and a clear lacquer which can be used to seal bare metal and painted surfaces to protect against rust,
Temperature rating up to 650 degrees C
400ml aerosol
This guide is for anyone looking to protect and enhance high-temperature surfaces like exhaust systems and engine components with E-Tech XHT paint. The key benefit is long-lasting protection and a high-quality finish without the need for a primer. Keep in mind that proper surface preparation is crucial for optimal results.
All features
Model Part Number
XHT007
Brand
E-Tech
Extended Product Information
FAQs
What surfaces can I use E-Tech XHT paint on?
It is designed for use on metal surfaces exposed to extremely high temperatures, such as exhausts, manifolds, engine blocks, and rocker covers.
Do I need a primer?
No, E-Tech XHT paint does not require a primer.
How should I prepare the surface before painting?
Clean the surface thoroughly to remove any rust, grease, or old paint. Use a wire brush or sandpaper for best results.
How many coats should I apply?
Apply multiple thin coats for the best finish and durability. Allow each coat to dry before applying the next.
What is the temperature rating of the paint?
The paint has a temperature rating up to 650 degrees C.
How do I clean the painted surface?
Clean the painted surface with a mild detergent and water. Avoid using abrasive cleaners or solvents.
Can I use this on plastic?
No, it is not recommended for use on plastic surfaces.
Troubleshooting
Paint is peeling or flaking.
Ensure proper surface preparation. Remove any loose paint and reapply, following application instructions.
Paint is running or dripping.
Apply thinner coats and ensure the can is the correct distance from the surface.
Poor adhesion.
Make sure the surface is completely clean and degreased before applying the paint. Lightly sand the surface for better adhesion.
Pros and Cons
Pros
High-temperature resistance up to 650°C.
Provides a long-lasting, high-quality finish.
Easy to apply aerosol.
No primer required, saving time and effort.
Suitable for a wide range of applications and materials.
Cons
Requires proper surface preparation for optimal adhesion.
Limited color options (Blue is specifically mentioned).
Aerosol application may be less precise than other methods.
May require multiple coats for desired finish.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from rust, grease, and old paint. Use a wire brush or sandpaper to remove any loose material.
Application: Shake the aerosol can well before use. Apply thin, even coats, holding the can approximately 20-30 cm from the surface. Avoid thick coats to prevent runs or drips. Multiple thin coats are better than one thick coat.
Drying Time: Allow each coat to dry for the recommended time (check the can for specific instructions) before applying the next coat. Full curing time will also be on the can. This can take several hours, but is worth the wait.
Compatibility: Suitable for use on metal surfaces exposed to high temperatures, such as exhausts, manifolds, and engine components. It is not recommended for use on plastic or other non-metal surfaces.
Care: Clean the painted surface with a mild detergent and water. Avoid using abrasive cleaners or solvents that may damage the paint.
Demon Tweeks£10.19Visit shop 
eBay£12.27Visit shop 
B&Q£13.59Visit shop 