Best current price£17.99from eBay
Shopping.co.uk recommended and popular offers
eBay£17.99Visit shop AET FSC2GDIM40 Satin Chrome Flat 400W-10 Amp Double 2 Gang 2 Way 400W Light
Visit shop2 offers from £17.99 - £20.12
View price history by clicking the chart icon.
The Alliance Electrical 2-Gang 2-Way Light Dimmer Switch is designed for homeowners and electricians looking to add refined control and ambiance to their lighting setups. Featuring a stylish silver finish and a flat plate design, this switch offers precise rotary dimming for both mains and low-voltage lighting, though users must ensure they have a back box depth of at least 35mm to accommodate the internal components.
| Colour | Silver |
|---|---|
| Model Part Number | FSC2GDIM40 |
| Brand | Alliance Electrical |
This switch is designed for standard and low-voltage lighting. Always check that your specific LED bulbs are marked as 'dimmable' before use.
Each gang supports a maximum load of 400W.
No, the back box is not included. You must ensure you have a 35mm deep back box installed in your wall.
Yes, this switch is compatible with both 1-way and 2-way circuit configurations.
Use a dry, lint-free cloth to dust the surface. Avoid liquid cleaners or solvents.
Check that the bulbs installed are specifically labeled as dimmable. Non-dimmable bulbs are not compatible with rotary dimmers.
Verify your back box depth is at least 35mm. If it is shallower, you may need to install an extension box or replace the back box.
Ensure the total wattage of the lighting circuit is within the 400W limit and that the switch is correctly wired for the 2-way circuit.
Installation requires basic electrical knowledge; always ensure the main power is isolated at the consumer unit before beginning. This unit requires a 35mm deep back box. Ensure your lighting fixtures are compatible with dimmer switches—specifically, incandescent or compatible dimmable low-voltage lamps. Do not exceed the 400W limit per gang. To clean, use a soft, dry cloth. Avoid using harsh chemical cleaners or abrasive sponges, as these can dull the silver finish and damage the plate surface.
