Best current price£4.11from The Range
Shopping.co.uk recommended and popular offers
The Range£4.11Visit shop Jcp Fixings Sds+ Drill Bit - 6.0Mm X 110Mm, 2 Cutting Edges - Silver
Visit shop30 offers from £4.11 - £18.04
View price history by clicking the chart icon.
The JCP Fixings SDS+ Drill Bit (10.0mm x 260mm) is a heavy-duty, professional-grade tool designed for DIY enthusiasts and tradespeople who need reliable performance in masonry and concrete. Its primary benefit is a dual-cutting edge design that significantly improves drilling speed and precision during demanding construction tasks. A potential caveat for users is that it is specifically engineered for SDS+ drill chucks, meaning it will not fit standard three-jaw drill chucks without an adapter.
| Model Part Number | 1427654 |
|---|---|
| Brand | JCP Fixings |
No, this bit is designed specifically for SDS+ chucks and will not fit a standard three-jaw drill chuck.
While it can penetrate wood, it is optimized for masonry and concrete. Using it on wood may produce rougher holes compared to wood-specific bits.
No, this bit is designed for dry drilling in masonry and concrete.
Stop drilling immediately to avoid damaging the bit tips. Reposition your hole or use a metal-rated drill bit if you must pass through steel.
If you notice a significant decrease in drilling speed despite applying consistent pressure, it is likely that the cutting edges have worn down.
Ensure the SDS+ chuck collar is fully retracted and pull the bit firmly. If it remains stuck, check for debris inside the chuck.
Verify the bit is properly seated in the chuck and ensure the material you are drilling does not contain hidden steel rebar.
To set up, simply insert the bit into your rotary hammer drill's SDS+ chuck until it clicks into the locked position. Always ensure the drill is in 'hammer' or 'hammer drill' mode for masonry work. To maintain the tool, store it in a dry environment to prevent oxidation and inspect the tip periodically for signs of metal wear or blunting. If the bit becomes extremely hot after continuous drilling, allow it to cool down naturally before touching it or resuming work.
