xTool Laser Module - 20W
Best current price£415.83from xTool
Best offers
Shopping.co.uk recommended and popular offers
xTool£415.83Visit shop xTool M2 20W 455Nm Diode Laser Module
Visit shopxTool£415.83Visit shop One Offer
1 offer from £415.83
View price history by clicking the chart icon.
Product Information
Full details
The xTool 20W Laser Module is designed for makers and professionals using the xTool M2 who need to push the boundaries of their craft by cutting through denser and thicker materials. This upgrade significantly enhances the cutting speed and material depth capacity of your machine, allowing for complex, high-precision projects that standard modules cannot manage. While this module provides a massive boost in power, it requires careful material selection and calibration to ensure clean, burn-free edges on lighter surfaces.
All features
| Model Part Number | M2 |
|---|---|
| Brand | xTool |
Extended Product Information
FAQs
Can this module cut metal?
The 20W module is primarily designed for wood, acrylic, and leather. It can mark stainless steel but is not intended for cutting through metal sheets.
Is this compatible with the original M2 software?
Yes, it is fully compatible with the standard software suite provided by xTool once the machine configuration is updated.
Does this module require a different power supply?
The M2 chassis is designed to handle the power requirements of the 20W module, provided it is plugged into a stable, recommended power source.
What is the maximum thickness I can cut?
While it varies by material density, it is typically capable of cutting through solid wood up to 10mm-12mm in multiple passes.
How often should I clean the lens?
It is recommended to inspect the lens before every project and deep clean it every 5-10 hours of active laser time.
Troubleshooting
Laser fails to cut through material
Check if the focal point is correctly set and inspect the lens for debris that may be obstructing the beam.
Charred edges on wood projects
Increase the air assist pressure and ensure the laser speed is optimized to prevent excessive heat buildup in a single area.
Laser module not detected by software
Power cycle the M2 and check the connection cable between the module and the X-axis carriage.
Pros and Cons
Pros
- Significantly faster cutting speeds for thick materials
- Enhanced ability to cut through solid woods and opaque acrylics
- Seamless integration with the xTool M2 hardware platform
- Professional-grade precision for detailed vector designs
Cons
- Requires more frequent cleaning of the protective lens due to high smoke output
- Material limitations still apply; cannot cut transparent acrylics
- Higher power requires more careful management of fire safety protocols
Setup, Compatibility & Care
Installation requires disconnecting the existing module from the M2 carriage and replacing it with the 20W unit, following the locking mechanism provided in the M2 base chassis. Ensure the communication cable is firmly seated to prevent signal loss during high-speed operations.
For ongoing care, wipe the protective lens with a clean, microfiber cloth dipped in isopropyl alcohol every 5-10 hours of operation. Dust or resin buildup on the lens can significantly reduce the laser's power and may lead to permanent component damage. Always store the module in a dry, dust-free environment when not in use for extended periods.
Similar items
xTool M2 - CMYK Inkjet Printing ModuleFrom £91
Nuie Mayford Storage Unit - White MFCFrom £77
Ideal Mexico HE 30 KW Boiler - Natural GasFrom £3138
Igenix Under Counter Fridge - WhiteFrom £120
GoodHome Imandra Gloss White Bathroom Double Wall Cabinet - (H)90Cm - (W)60CmFrom £95
Teknix Freezer - White - FFrom £482
Kitchen Kit Wall Unit - White - FKKJ0013From £130
Kitchen Kit Base End Panel - Grey - FKKV4128From £38
xTool Infrared Laser Module - 3W - M2From £416
GoodHome Imandra Gloss White Double Bathroom Cabinet - WhiteFrom £195
VeeBath Desire Venus Vanity Unit And Slim-Edge Basin - 700mm - WhiteFrom £141
TP-Link EAP725-Wall - Wi-Fi 7 Access PointFrom £127