Screwdriver Bits - 1/4"" Hex Shank - 1.5mm Hexagon Head - Magnetic - 50mm Length - 5pcs
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and professionals who need reliable screwdriver bits for power and air tools. The key benefit is their hex tip and shank design for efficient screw driving. A potential caveat is their specific application for hex head screws only. These uxcell screwdriver bits are designed with a hex tip head and hex shank, making them suitable for use with power tools and air tools to drive hex head screws. They are easy to install on a screwdriver handle, offering a practical solution for various fastening tasks.
All features
| Model Part Number | S2H1/4 |
|---|---|
| Brand | uxcell |
Extended Product Information
FAQs
What type of screws are these bits designed for?
These bits are specifically designed for driving screws with hexagon (hex) heads.
Can I use these bits with a standard drill?
Yes, as long as your standard drill has a chuck that can securely grip the 1/4 inch hex shank.
Are these bits suitable for impact wrenches?
Yes, the hex shank and robust design make them suitable for use with impact tools and air tools.
How do I clean the magnetic tip?
Wipe the magnetic tip with a clean, dry cloth to remove any metal particles that may reduce its magnetic strength.
What is the shank size of these bits?
The shank size is 1/4 inch, which is a standard size for most power tools.
Do these bits come in different lengths?
Yes, this product line is available in various lengths such as 50mm, 75mm, and 100mm, along with different head sizes.
Troubleshooting
Screwdriver bit slips out of the screw head.
Ensure you are using the correct size bit for the screw head. Check if the screw head is stripped. Verify the bit is fully inserted into the tool's chuck and securely tightened.
Bit does not hold firmly in the power tool.
Confirm the bit has a 1/4 inch hex shank. Ensure the tool's chuck is clean and properly tightened around the bit shank. Try a different bit to rule out a faulty tool chuck.
Reduced magnetic strength.
Clean the magnetic tip with a dry cloth to remove any metal shavings or debris that might be interfering with the magnetism.
Pros and Cons
Pros
- Secure fit for hex head screws.
- Durable and built for power tool use.
- Magnetic tip aids in screw handling.
- Easy to swap between tools.
- Available in multiple sizes for versatility.
Cons
- Only compatible with hex head screws.
- May wear down over extended heavy-duty use compared to premium brands.
- Specific MPN details can vary between listings.
- Requires a compatible power or air tool for full benefit.
Setup, Compatibility & Care
Setup: Simply insert the hex shank of the screwdriver bit into the chuck of your compatible power tool or air tool. Ensure it is seated firmly and tighten the chuck to secure the bit.
Compatibility: These bits are designed for use with standard 1/4 inch hex shank receivers found on most impact drivers, drills, and air tools. They are specifically intended for driving screws with matching hexagon (hex) heads.
Care: To maintain performance, periodically clean the bits to remove debris and rust. Store them in a dry place to prevent corrosion. Inspect bits for wear or damage before each use and replace if compromised.