Best current price£7.86from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.86Visit shop B&Q - Threaded Adapter Hex Bush 1/4 Bsp Male To 1/8 Bsp Female Air Line Fitting Ft081
Visit shop1 offer from £7.86
View price history by clicking the chart icon.
This guide is for DIY enthusiasts, plumbers, and mechanics needing to connect different-sized fittings. The AB Tools Threaded Adapter Hex Bush offers a straightforward solution for adapting 1/4" BSP male threads to 1/8" BSP female threads, ensuring a secure connection. A key caveat is understanding BSP thread sizing, which refers to nominal pipe size, not exact diameter.
| Model Part Number | FT081 |
|---|---|
| Brand | AB Tools |
BSP stands for British Standard Pipe. It's a set of technical standards for mechanical pipe fittings and pipe threads used across the world, particularly in plumbing and pneumatic applications. BSP thread sizes (like 1/4" or 1/8") refer to the nominal size of the pipe, not the actual diameter of the thread.
BSP thread sizes do not directly correspond to their outer diameter. For 1/4" BSP, the approximate overall diameter is 13mm. For 1/8" BSP, the approximate overall diameter is 9.5mm. It's best to confirm compatibility by the stated BSP size.
No, this adapter is designed exclusively for BSP threads. NPT (National Pipe Thread) is a different standard with a different thread angle and pitch, and attempting to connect them can lead to leaks or damage.
For many applications, a tight mechanical fit is sufficient. However, for applications involving high pressure or where a perfect seal is critical, using a suitable thread sealant like PTFE tape or pipe dope is recommended.
Corrosion typically occurs if the zinc plating is scratched or damaged, exposing the base metal to moisture and air. Prolonged exposure to harsh chemicals or extreme environmental conditions can also degrade the plating over time.
You will need a wrench or socket that fits the hex head of the adapter for tightening. A soft jawed vice or clamp can also be helpful for holding fittings steady.
Check for dirt or debris in the threads of both the adapter and the fitting. Ensure you are using the correct BSP thread size and that the fittings are aligned properly. Try backing it out and re-aligning.
Ensure the adapter was tightened sufficiently. Check for damage to the threads on the adapter or the mating fitting. For critical applications, consider using appropriate thread sealant (e.g., PTFE tape or pipe dope) suitable for BSP threads.
Ensure you are using a wrench that fits the hex head securely. If the hex head is damaged, replacement may be necessary.
Setup: Ensure both the male and female BSP threads are clean and free from debris before attempting to connect. Screw the adapter by hand first to prevent cross-threading, then use an appropriate wrench on the hex head to tighten securely. Do not overtighten, as this can damage the threads.
Compatibility: This adapter is specifically designed for BSP (British Standard Pipe) threaded fittings. It is not compatible with NPT (National Pipe Thread) or other thread standards. Verify that your existing fittings are 1/4" BSP Male and the receiving fitting is 1/8" BSP Female.
Care: To maintain optimal performance and longevity, periodically inspect the adapter for signs of wear or corrosion. Clean with a dry or slightly damp cloth if necessary. Avoid abrasive cleaners that could damage the zinc plating.
