Mobility Knee Walker Scooter - Gr8 Home

The Gr8 Home Mobility Knee Walker Scooter has a maximum user weight capacity of 300 lb.

The handlebar height can be adjusted from 33.7'' to 41.7'', and the knee pad height from 17'' to 21''. Use the designated adjustment levers or pins on the frame and post to set your desired heights and secure them.

This scooter is best suited for smooth, stable surfaces like paved paths, sidewalks, and indoor flooring. It is not designed for rough terrain, sand, gravel, or thick grass.

Periodically check the brake cables and pads for wear. Ensure the levers engage the wheels effectively. Refer to the user manual for specific adjustment instructions or contact customer support if you suspect a problem.

Yes, some assembly is required. You will typically need to attach the handlebars and adjust the height settings. Detailed instructions are provided in the product manual.

The primary benefit is providing increased stability, comfort, and mobility, allowing users to move more freely and with less effort than with crutches, while keeping the injured leg elevated and supported.

Check the wheels for any debris, hair, or thread wrapped around the axles. Clean the wheel bearings and ensure they spin freely. If damage is suspected, contact customer support.

Ensure the brake cables are properly tensioned. Squeeze the brake levers firmly. If the issue persists, the brake pads may be worn or misaligned; consult the manual for adjustment procedures or contact support.

Make sure the locking mechanisms or pins for height adjustment are fully engaged and secured. Do not force adjustments; ensure all components are aligned before tightening.

Verify that all screws and bolts are tightened. Ensure the scooter is on a level surface. Adjust the knee pad and handlebar to the correct height for optimal balance and posture.