Best current price£391.95from eBay
Shopping.co.uk recommended and popular offers
eBay£391.95Visit shop Rivarosssi BLS Re4/4 167 Ausserberg Electric Loco IV (DCC-Sound) HO Gauge
Visit shop1 offer from £391.95
View price history by clicking the chart icon.
This Rivarossi BLS Re 4/4 167 Electric Locomotive is designed for experienced model railway enthusiasts looking to enhance their HO scale layouts with authentic Italian-designed, DCC-sound equipped models. Its key benefit is the highly detailed replica with integrated sound, offering a more immersive operational experience. A potential caveat is the need for a DCC-compatible controller for full sound and operational features, and a DCC decoder is required for its operation. This model represents a historical piece of Italian railway engineering, built by Hornby Hobbies Ltd. under the Rivarossi brand, known for its long history in model railroading.
| Model Part Number | HR2958S |
|---|---|
| Brand | Rivarosssi |
This is an HO scale model, which is a standard size for model railways.
Yes, this locomotive is DCC enabled and requires a DCC controller for its full sound and operational features. It can run on DC analog layouts, but sound and advanced functions will not be available.
Period IV refers to a specific era in model railway history, generally corresponding to European railways from approximately 1970 to 1980. This indicates the paint scheme and detailing are accurate for that time.
This model comes with integrated sound. Customization of sound functions may be possible by adjusting the locomotive's decoder settings (CVs) through your DCC controller, depending on the capabilities of the installed decoder.
Regularly clean the track and wheels. Occasional lubrication of the drive mechanism with model-specific lubricant is advised. Keep the locomotive clean and stored properly when not in use.
While the model itself is detailed, its DCC and sound features are best suited for modelers who have some experience with DCC control systems. Beginners may find a non-DCC or DC-only model easier to start with.
Ensure track power is on and the DCC controller is active. Check that the locomotive is correctly seated on the track and that all wheels are making good contact. Verify the locomotive's address is correctly set on your DCC controller.
Check that sound is enabled on your DCC controller. Ensure the locomotive's sound decoder is not muted via a CV setting. If the issue persists, the sound module may require inspection or professional service.
Clean the track and the locomotive's wheels with an appropriate track cleaner and wheel cleaning tool. Ensure there are no obstructions in the drive mechanism. Check for proper lubrication of the gears and motor.
Try resetting the locomotive's decoder to its factory default settings (refer to decoder manual if available). Ensure your DCC system is capable of communicating with the specific decoder type installed.
Setup: To operate this locomotive, ensure you have a DCC-compatible controller and track system. The locomotive is typically ready to run on a DCC system out of the box. For full sound functionality, ensure your DCC controller is set up to communicate with the locomotive's decoder. Consult your DCC controller's manual for specific CV (Configuration Variable) settings if you wish to customize sound or operational parameters.
Compatibility: This model is designed for HO scale layouts. It is compatible with standard HO gauge track systems. While the DCC functionality is designed to be NMRA compliant, always check your DCC system's specifications for maximum compatibility.
Care: Keep the locomotive clean from dust and debris. Gently wipe the exterior with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. For the wheels and drive mechanism, occasional lubrication with model railway-specific lubricant may be necessary, following general model train maintenance guidelines. Store the model in its original packaging or a suitable display case when not in use to protect it from damage and dust.
