Sealey Tyre Inflator - Twin Push-On Connection

This Sealey Tyre Inflator features a composite body and dial type gauge with a rubber protector. I...

Best current price£26.69from Power Tools Direct

All Offers

19 offers from £26.69 - £40.99

View price history by clicking the chart icon.

Power Tools DirectSealey Sa9312 Tyre Inflator With Twin Push-On Connector
£5.95 delivery
£26.69
Visit shop
eBaySealey Tyre Inflator with Twin Push-On Connector Tyre Inflators Gauges SA9312
Free delivery in 1–3 days
£31.10
Visit shop
Rapid Online - Rapid Electronics Ltd.Sealey SA9312 Professional Tyre Inflator with Twin Push-on Connector
Free delivery in 1–3 days
£31.64
Visit shop
Tooled UpSealey Professional Push On Tyre Inflator and Dial Gauge
£5.95 delivery
£31.95
Visit shop
B&QB&Q - Tyre Inflator With Twin Push-On Connector 1/4" Bsp 12 Bar 175 Psi Sa9312
Free delivery in 1–3 days
£32.20
Visit shop

Product Information

Full details

This Sealey Tyre Inflator is designed for mechanics and automotive enthusiasts who need a reliable tool for checking and adjusting tyre pressures. Its key benefit is the accurate dial gauge and versatile twin push-on connector for quick inflation. A potential caveat is the need for an external air source connection.

All features

Model Part NumberSA9312
BrandSealey

Extended Product Information

FAQs

What is the maximum air supply pressure this inflator can handle?

The maximum air supply pressure is 12 bar (175 psi).

What units does the gauge display?

The gauge is calibrated in both bar and psi.

What is the range of the pressure gauge?

The gauge has a range of 0-10 bar (0-145 psi).

How long is the rubber hose?

The rubber hose is 500mm (approximately 20 inches) long.

What size is the air inlet connection?

The inlet size is 1/4"" BSP.

Does this inflator come with an air compressor?

No, this is a tyre inflator and requires connection to an external air compressor.

How do I clean the Sealey Tyre Inflator?

Wipe the composite body and gauge with a clean, dry cloth. Avoid using solvents or abrasive cleaners.

Troubleshooting

Gauge not reading pressure

Ensure the twin push-on connector is fully seated on the tyre valve. Check for leaks at the connection point and inspect the air supply line.

Air leaking from the connector

Verify the connector is properly attached to the valve. Inspect the rubber seals on the connector for damage and replace if necessary.

Inaccurate pressure readings

Allow the gauge to settle after inflation. Compare readings with a known accurate gauge. Ensure the dial is not obstructed.

Connector difficult to attach

Ensure the tyre valve is clean and free of debris. Apply a small amount of silicone lubricant to the valve stem if needed.

Pros and Cons

Pros

  • Accurate pressure readings with a clear dial gauge.
  • Durable composite body with protective features.
  • Versatile twin push-on connector for quick application.
  • Wide pressure range suitable for most vehicles.
  • Adequate hose length for convenience.

Cons

  • Requires an external air compressor for operation.
  • Gauge protector may limit visibility at certain angles.
  • Twin push-on connector might not be compatible with all wheel designs.

Setup, Compatibility & Care

Setup:

  1. Connect the 1/4"" BSP inlet to your air compressor hose.
  2. Ensure the air compressor is turned on and supplying air.
  3. Press the twin push-on connector firmly onto the tyre valve.
  4. Observe the dial gauge to monitor the tyre pressure.
  5. Inflate or deflate as needed using the air source controls.

Compatibility:

  • Compatible with standard air compressors with a 1/4"" BSP outlet.
  • The twin push-on connector is designed for standard tyre valves found on most cars, vans, and light trucks. Always check compatibility before use.

Care:

  • Wipe the composite body and gauge with a clean, dry cloth after each use.
  • Store in a dry environment to prevent corrosion.
  • Periodically inspect the rubber hose and connectors for signs of wear or damage.

Price History

DatePrice
Visit shop