TUXING Pcp Air Compressor - 4500Psi
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for users of the TUXING PCP Air Compressor, designed for filling air guns and paintball guns. The key benefit is its portability and ability to operate oil-water-free, providing clean air. However, it's important to note the maximum recommended tank size is 0.4 Gal/1.5 L. This compressor features a maximum inflation pressure of 4500 Psi / 30Mpa, operates on both 12V and 220V power, and includes safety features for reliable performance.
All features
| Brand | TUXING |
|---|
Extended Product Information
FAQs
What is the maximum tank size this compressor can handle?
The maximum recommended inflation tank size is 0.4 Gal/1.5 L.
What power sources can I use?
You can use either a 12V car battery or a 220V AC home socket with the included adapter.
How long does it take to fill a tank?
A 0.5 L tank takes approximately 18 minutes to fill from 0 to 300Bar and 5 minutes from 200 to 300Bar.
Does the compressor require oil?
No, the TUXING PCP Air Compressor operates oil-water-free.
What safety features does the compressor have?
It includes a pressure gauge and a safety valve for safe operation.
How do I maintain the compressor?
Regularly drain the oil-water separator and store the compressor in a dry place.
What kind of connector does it use?
It uses an 8MM quick connector.
How do I cool down the compressor?
The cooling fan is manually controlled. Shut off the compressor and keep the fan running if the temperature reaches 70°C.
Troubleshooting
Compressor won't turn on.
Check the power connection and ensure it is properly connected to a power source. Verify the power switch is in the on position. Check the fuse if applicable.
Compressor is not reaching maximum pressure.
Check for any leaks in the system, including the hose and connections. Ensure the pressure relief valve is functioning correctly. Check the filter and replace if necessary.
Compressor overheats.
Ensure the cooling fan is running if the temperature reaches 70°C. If the problem persists, reduce the fill time or allow the compressor to cool down before further use.
Air output is contaminated.
Drain the oil-water separator regularly. Inspect and replace the filter if it appears dirty or damaged.
Pros and Cons
Pros
- Portable and lightweight design.
- Dual power source compatibility (12V and 220V).
- Oil-water-free operation for clean air.
- Includes a safety valve and pressure gauge.
- Efficient filling times for smaller tanks.
- Easy to set up and use.
Cons
- Maximum recommended tank size is 0.4 Gal/1.5 L.
- Manual control required for the cooling fan.
- May not be suitable for very large air tanks.
- Requires an adapter for home use (included).
- Inflation time can be longer for larger tanks.
- Fan noise during operation.
Setup, Compatibility & Care
- Connecting Power: For 220V operation, use the included adapter. For 12V operation, connect to a car battery.
- Connecting to Air Gun/Paintball Gun: Use the 8MM quick connector to attach to your device. Ensure a secure fit.
- Operating the Compressor: Turn on the compressor and monitor the pressure gauge. Do not exceed 4500 Psi / 30Mpa.
- Cooling Fan: The cooling fan is manually controlled. If the temperature reaches 70°C, shut off the compressor and let the fan run until it cools down.
- Maintenance: Regularly check and drain the oil-water separator. Store the compressor in a dry place.
- Compatibility: This compressor is compatible with most PCP air guns and paintball guns that use a standard 8MM quick connector.