Shopping.co.uk

Kenable 3m IEC C14 to 1 Way Gang UK Mains Sockets Lead UPS Power Splitter - 008298

Kenable 3m IEC C14 to 1 Way Gang UK Mains Sockets Lead UPS Power Splitter - 008298

3m IEC C14 to 1 Way Gang UK Mains Sockets Lead UPS Power Splitter. This is a 1-way mains extensio...

Best current price£11.49from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£11.49Visit shop

3m IEC C14 to 1 Way Gang UK Mains Sockets Lead UPS Power Splitter [008298]

Visit shop

All Offers

2 offers from £11.49 - £11.51

View price history by clicking the chart icon.

eBay3m IEC C14 to 1 Way Gang UK Mains Sockets Lead UPS Power Splitter [008298]
Free delivery in 1–3 days
£11.49
Visit shop
B&QB&Q - Iec C14 To 1 Way Gang Uk Mains Sockets Lead Ups Power Supply 3M
Free delivery in 1–3 days
£11.51
Visit shop

Product Information

Full details

The Kenable 008298 is a 3-meter power splitter lead designed for users who need to connect standard UK mains plugs to devices with an IEC C14 inlet, most commonly Uninterruptible Power Supplies (UPS). Its key benefit is providing a simple and reliable way to adapt an IEC connection to a single UK socket. A caveat is that it is unfused, meaning it relies on the protection provided by the connected UPS or the device itself.

All features

Model Part Number008298
Brandkenable

Extended Product Information

FAQs

What is an IEC C14 connector?

An IEC C14 connector is a type of three-pin electrical connector commonly found on computer power supplies and UPS units, often referred to as a 'kettle style' plug.

Is this lead fused?

No, this lead is unfused. It relies on the overcurrent protection provided by the connected power source (like a UPS) or the device plugged into it.

What is the maximum power this lead can handle?

The lead supports a maximum current of 10 Amperes at 250 Volts.

Can I use this lead outdoors?

No, this product is designed for indoor use only and should be kept away from moisture and damp conditions.

What is the difference between IEC C13 and C14 connectors?

IEC C13 connectors are female, typically found on power cords for equipment. IEC C14 connectors are male, typically found on power input sockets for devices like UPS units or computer power supplies. This lead connects a C14 input to a standard UK socket.

Can I connect multiple devices to the single UK socket?

While the socket is a standard UK type, it is recommended to connect only one device, and ensure its total power draw does not exceed the 10A limit of the lead.

How long is the cable?

The cable length is 3 meters.

Troubleshooting

No power to the connected device

Ensure the IEC C14 plug is fully inserted into the power source. Verify that the power source itself is active and functioning. Check that the connected device is switched on and operational.

Device intermittently loses power

Check for loose connections at both the IEC and UK plug ends. Ensure the connected device's power draw does not exceed the 10A limit of the lead. Inspect the cable for any visible damage.

Connector is difficult to insert

Ensure you are using the correct IEC C14 and Type G sockets. Do not force connections; if resistance is met, check alignment and for any obstructions.

Pros and Cons

Pros

  • Provides a simple solution for connecting standard UK plugs to UPS units with IEC C14 ports.
  • The 3-meter cable offers good flexibility in placement.
  • Durable construction suitable for regular use.
  • Supports a common 10A load, covering many electronic devices.
  • Easy to set up with no complex installation.

Cons

  • The lead is unfused, requiring reliance on the connected equipment for overcurrent protection.
  • Only provides a single UK socket, limiting expansion.
  • Designed for indoor use only, not suitable for outdoor or damp environments.
  • The extension strip itself is relatively short (approx. 8cm).

Setup, Compatibility & Care

Setup:

  1. Connect the IEC C14 (kettle style) plug into the corresponding IEC C14 socket on your power source, such as a UPS or power distribution unit.
  2. Plug your standard UK mains powered device into the UK socket on the lead.

Compatibility:

  • Compatible with any device featuring a standard IEC C14 inlet.
  • Compatible with standard UK mains plugs (Type G).
  • Suitable for use with devices drawing up to 10A.
  • Designed for 250V AC input.

Care:

  • Keep the lead dry and away from moisture.
  • Avoid sharp bends or kinks in the cable.
  • Periodically check the cable and connectors for damage.
  • Ensure the lead is not overloaded beyond its 10A capacity.
  • Store in a cool, dry place when not in use.

Price History

DatePrice
Visit shop