D-C-Fix Marble Grey Self Adhesive Vinyl Wrap Film - 15M(L) 90Cm(W)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This D-C-Fix Marble Grey self-adhesive vinyl wrap film is designed for DIY enthusiasts and renters looking to quickly and affordably update surfaces like countertops, kitchen doors, and furniture. Its key benefit is the ability to dramatically change the look of a space with a realistic marble effect without the cost of replacement. A potential caveat is that while removable, some residue may require cleaning, and proper surface preparation is crucial for best results.
All features
| Model Part Number | 5056525328643 |
|---|---|
| Brand | d-c-fix |
Extended Product Information
FAQs
Can this vinyl be used on textured surfaces?
It is not recommended for highly textured surfaces, as adhesion will be compromised, and it will be difficult to achieve a smooth finish. It works best on smooth, non-porous surfaces.
How long does the D-C-Fix vinyl typically last?
The product is rated 5 stars for durability, lightfastness, and shrinkage, suggesting it is designed for long-term use when applied correctly to suitable surfaces. Actual lifespan can vary based on environmental factors and usage.
Is this vinyl waterproof?
The vinyl itself is water-resistant, making it suitable for kitchen worktops or backsplashes, but it should not be submerged in water. Ensure edges are well-sealed to prevent moisture ingress.
Can I overlap the vinyl if my surface is wider than 90cm?
While you can overlap, it's best to minimize this for a seamless look. If overlapping is necessary, keep it to a minimum and ensure the edges are pressed down firmly. A small overlap may be noticeable.
Will it withstand heat from cooking appliances?
The vinyl has good lightfastness and durability but is not designed to withstand direct, high heat from cooking appliances or hot pans. It is suitable for areas around cooking zones but should not be placed directly behind stovetops where intense heat is generated.
What is the best tool for applying the vinyl smoothly?
A soft squeegee or a plastic card (like a credit card) is ideal for smoothing the vinyl and pressing out air bubbles. Ensure the tool has a soft edge to avoid scratching the vinyl.
Troubleshooting
Air bubbles or creases during application
Gently lift the vinyl from the affected area and reapply, using a squeegee to smooth it out from the center towards the edges. For stubborn bubbles, carefully prick with a fine needle and press flat.
Vinyl not adhering properly
Ensure the surface is thoroughly cleaned, dried, and free of dust, grease, or moisture. Reapply heat with a hairdryer if needed, and press firmly.
Difficulty removing the vinyl
Use a hairdryer on a medium heat setting to warm the vinyl evenly. This will soften the adhesive, allowing for easier peeling. Pull slowly and steadily.
Sticky residue left after removal
Apply a small amount of warm, soapy water to the residue and gently rub with a soft cloth. For stubborn residue, a specialized adhesive remover can be used cautiously, testing in an inconspicuous area first.
Pros and Cons
Pros
- Provides a realistic and attractive marble finish.
- Allows for easy repositioning during application due to low-tack adhesive.
- Offers a cost-effective alternative to replacing furniture or countertops.
- Suitable for renters due to its non-permanent and removable nature.
- High durability, lightfastness, and resistance to shrinkage.
- Quickly transforms the appearance of various surfaces.
Cons
- May leave some residue upon removal that requires cleaning.
- Surface preparation is critical for optimal adhesion and a smooth finish.
- Requires careful application to avoid air bubbles and creases.
- Removal can be more challenging on certain surfaces or if left for extended periods.
- The 90cm width might require multiple strips for larger surfaces, leading to potential seam visibility.
Setup, Compatibility & Care
Setup:
- Prepare the Surface: Ensure the surface is clean, dry, smooth, and free from grease or dust. For best results, clean with a mild detergent and water, then dry thoroughly.
- Measure and Cut: Measure the area to be covered and cut the vinyl film slightly larger than needed, allowing for trimming.
- Apply Gradually: Peel back a small section of the backing paper and carefully align the vinyl. Smooth the applied section with a squeegee or credit card, working from the center outwards to prevent air bubbles.
- Remove Bubbles: If bubbles form, gently lift the vinyl from that area and reapply, smoothing again. Small pinpricks can also release trapped air.
- Trim Edges: Once applied, use a sharp craft knife to trim any excess vinyl around the edges.
Compatibility:
This vinyl is best suited for smooth, non-porous surfaces such as laminate, painted wood, glass, metal, and finished furniture.
Care:
Clean with a damp cloth and mild soapy water. Avoid abrasive cleaners or scouring pads that could scratch the surface. If residue remains after removal, use warm, soapy water and a soft cloth to gently clean the area.