Best current price£4.99from eBay
Shopping.co.uk recommended and popular offers
eBay£4.99Visit shop 40mm x 32mm Reducer Universal Compression Waste Fittings
Visit shop
B&Q£13.99Visit shop B&Q - 40mm X 32mm Reducer Universal Compression Waste Fittings
Visit shop3 offers from £4.99 - £13.99
View price history by clicking the chart icon.
The Fluidmaster 40mm x 32mm Reducer is designed for plumbers and DIY enthusiasts who need to efficiently join waste pipes of different diameters. Its key benefit is the quick and reliable connection of 40mm and 32mm pipes using simple compression fittings, eliminating the need for solvent welding. A potential caveat is ensuring the pipe material is compatible with the compression fittings, though it generally works with plastic, copper, and lead.
| Model Part Number | 40mm X 32mm Reducer |
|---|---|
| Brand | Fluidmaster |
This reducer is specifically designed to connect a 40mm diameter pipe to a 32mm diameter pipe.
No, this fitting uses compression fittings and does not require any solvent welding, glue, or primer for installation.
The universal compression multi-fit design is compatible with plastic (ABS, PVC), copper, and lead pipes.
No, this fitting is designed exclusively for waste water and drainage applications and should not be used for hot water or pressurized lines.
Tighten the nuts firmly by hand first, then use pliers or a wrench for a final snug tightening. Avoid overtightening, which can damage the pipe or fitting.
While PVC is weather-resistant, it's best suited for indoor plumbing applications. For outdoor use, consult specific product guidelines or consider materials rated for UV exposure and extreme temperatures.
Please refer to the product packaging or Fluidmaster's official website for specific warranty information, as it may vary by region and retailer.
Ensure pipes are cut cleanly and squarely. Check that the rubber seals are properly seated and that the compression nuts are tightened sufficiently. If the pipe is rough or damaged, it may need to be re-cut.
Slightly moisten the end of the pipe with water. Ensure there are no obstructions or burrs inside the pipe or on the reducer's sealing surface. Verify you are using the correct size pipe for each end of the reducer.
Confirm that the pipe material is compatible with the compression fittings. Ensure the pipe is inserted fully into the fitting before tightening. Check for any damage to the pipe or the fitting's internal components.
Setup:
Compatibility:
Care:
