Best current price£19.84from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£19.84Visit shop Uhppote Resettable Break Glass Fire Emergency Exit Release Button For Exit Door 616010525718
Visit shop1 offer from £19.84
View price history by clicking the chart icon.
The UHPPOTE Resettable Break Glass Fire Emergency Exit Release Button is an ideal security solution for building managers and safety officers who require a reliable, high-durability trigger for emergency door releases. Its primary benefit is the resettable design, which avoids the need for glass replacement after a test or false alarm, providing long-term cost savings and convenience; however, users should note that it requires a clean, flat wall surface for proper mounting and wiring access.
| Brand | UHPPOTE |
|---|
No, this is a resettable unit. Simply use the reset key to return the button to its operational state.
It is designed for indoor use. If installing outdoors, ensure it is housed in a weather-resistant protective enclosure.
The unit measures 86mm x 86mm x 56mm.
Yes, a reset key is included to allow you to reset the mechanism after activation.
Yes, it is designed to work with most standard 12V/24V electromagnetic lock systems common in access control.
Ensure you are using the correct reset key and rotate it fully until the latch clicks into the neutral position.
Check your wiring connections at the control board; ensure the button is wired to the correct NC or NO trigger terminal of your lock controller.
Carefully remove the front panel and use compressed air to clear out dust or particles that may interfere with the mechanical trigger.
To install, mount the unit onto a standard 86mm electrical backbox. The device is compatible with most standard access control systems that require a normally open (NO) or normally closed (NC) circuit to release electromagnetic locks. Ensure the wiring is secured properly according to your local fire code requirements. For care, keep the sandblast panel free of debris. If the button is triggered, use the provided reset key to return the actuator to its original position. Clean the surface periodically with a dry, non-abrasive cloth to maintain the finish.
