SDG Tellis V2 Dropper Post - 31.6mm - 170mm

This post is compatible with frames featuring internal routing for dropper posts. Always check your frame's seat tube diameter to ensure it matches the 31.6mm specification.

You can use the provided 5mm, 10mm, or 20mm shims inside the post to reduce the total travel to your preferred length.

The Wintek cartridge is a sealed unit designed for reliability and is generally replaced rather than serviced internally if it fails.

Wiping down the stanchion after every ride is recommended to prevent dirt from migrating past the Trelleborg seal.

The low stack head provides 10mm of extra clearance, which is critical for riders who require more drop or ride frames with limited seatpost insertion depth.

Check if the internal polycarbonate keyway system or copper shims have worn down or shifted and re-seat them.

Verify that your cable tension is not too tight and check the seatpost collar torque, as over-tightening can pinch the housing.

Ensure you are using a standard 4mm or 5mm hex key with a ball-end, which allows for easier access at slight angles.