Best current price£44.99from Homebase
Shopping.co.uk recommended and popular offers
Homebase£44.99Visit shop Dulux Trade Walls And Ceilings Grey Steel 4 Vinyl Matt Paint 2.5L
Visit shop3 offers from £44.99
View price history by clicking the chart icon.
This Dulux Trade Grey Steel vinyl matt paint is designed for DIY enthusiasts and professional decorators seeking a high-quality finish for interior walls and ceilings. Its key benefit is excellent coverage that often requires fewer coats, saving time and effort. A key caveat to note is that this product is mixed to order and therefore non-returnable. This 2.5L paint offers a smooth, flat matt finish that effectively hides minor surface imperfections, making application straightforward with minimal mess and quick drying times.
| Model Part Number | DXVM1602500 |
|---|---|
| Brand | Dulux Trade |
This paint is specifically formulated for interior walls and ceilings. It is not recommended for use on wood or metal surfaces without appropriate priming and preparation, as it is a vinyl matt emulsion.
The number of coats depends on the surface and the colour being covered. However, this paint is known for its good coverage and often requires only two coats for a uniform finish, especially when covering lighter or similar shades.
The paint has a matt finish, which is generally less washable than silk or satin finishes. Minor marks can be gently wiped with a damp cloth, but heavy scrubbing may damage the finish.
The paint typically dries to the touch in 1-2 hours, and a second coat can usually be applied after 2-4 hours. Always refer to the specific instructions on the product tin for precise drying times, as these can vary with conditions.
This particular paint is tinted or mixed to order specifically for your chosen colour (Grey Steel 4). Due to its custom nature, it cannot be returned or refunded unless it is found to be faulty.
Low VOC means the paint contains low levels of Volatile Organic Compounds, which are chemicals that can be released into the air. Low VOC paints contribute to better indoor air quality during and after application.
Ensure the paint was stirred thoroughly. Apply using consistent brush/roller strokes and avoid overworking the paint. Check that the surface was properly prepared and primed if necessary.
While the paint offers good coverage, significantly darker or vibrant colours may require an extra coat. Ensure each coat is fully dry before applying the next. Consider using a primer tinted to a similar shade if covering a very dark original colour.
Drying times can be affected by temperature and humidity. Ensure the room is adequately ventilated and within the recommended temperature range for application and drying. Higher humidity levels will slow down drying.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Fill any cracks or holes with a suitable filler and sand smooth. Apply a mist coat of thinned paint for new or bare plaster.
Application: Stir the paint thoroughly before use. Apply using a brush, roller, or spray. For best results, apply two coats. Allow adequate drying time between coats as per manufacturer instructions.
Compatibility: Suitable for interior walls and ceilings. Not recommended for use in bathrooms or kitchens where high humidity or frequent cleaning is required, unless specifically prepared and sealed.
Care: Clean application tools immediately after use with water. For maintaining the painted surface, use a soft, damp cloth to gently wipe away marks. Avoid abrasive cleaners or excessive scrubbing, as this can damage the matt finish.
