SecureFix Direct Turnbuckle Eye and Eye - 3/4" x 6"
This open body Eye and Eye turnbuckle is designed for tightening, tensioning, and adjusting wire r...This open body Eye and Eye turnbuckle is designed for tightening, tensioning, and adjusting wire rope, chain, and cable applications. The open body design allows users to easily monitor the rate of turning. Constructed for durability, these turnbuckles feature forged eyes for superior strength and are heat-treated for longevity. Ideal for various rigging needs, including those in the caravanning industry. The unit complies with Federal Specifications FF-T-791b Type Form 1-class 4.
The SecureFix Direct 3/4" x 6" Eye and Eye Turnbuckle is an essential tool for professionals and DIY enthusiasts requiring precise tensioning for wire ropes, cables, and chains in rigging or caravanning applications. Its open body design provides the key benefit of clear visibility for monitoring adjustment progress, though users should be mindful that it requires regular inspection to ensure that the threads remain clean and lubricated for smooth operation.
All features
Brand
SecureFix Direct
Extended Product Information
FAQs
Can this turnbuckle be used for lifting heavy loads?
This turnbuckle is designed for tensioning and rigging applications. It is not intended for overhead lifting unless explicitly rated for such purposes by a qualified engineer.
What does the 3/4" x 6" measurement refer to?
The 3/4" refers to the diameter of the thread, and the 6" refers to the take-up distance, which is the total length of adjustment available when the turnbuckle is fully opened from a closed position.
Is the material resistant to rust?
The material is heat-treated for strength; however, like most steel rigging hardware, it should be kept lubricated and inspected for corrosion, especially in salt-water or high-humidity environments.
How do I know if I have overtightened it?
You should stop adjusting if the eye ends are extended so far that they are close to the ends of the internal threads. Always leave a sufficient amount of thread engaged within the body for safety.
What is the benefit of an 'Eye and Eye' configuration?
The eye and eye configuration allows for easy connection to various hardware, such as shackles, which can be passed through the eye, providing a secure and flexible connection point.
Troubleshooting
The center body is difficult to turn.
Apply a high-quality penetrating oil to the threads and allow it to sit; check for any debris trapped in the threads and clear it out.
The turnbuckle loses tension over time.
Ensure that the eyes are fully tightened into the body and consider using a secondary locking mechanism, such as safety wire, to prevent rotation.
Pros and Cons
Pros
High-strength forged eye construction
Open body allows for easy visual monitoring
Heat-treated for increased durability
Meets rigorous federal quality standards
Cons
Requires regular lubrication to prevent seizing
Not suitable for overhead lifting applications
Open threads may require cleaning in high-grit environments
Setup, Compatibility & Care
Installation: Attach the eyes to your anchor points using appropriate hardware such as shackles or bolts. Ensure the cable or chain is secured to the eyes before applying tension.
Tensioning: Hold the eyes stationary and turn the center body to adjust tension. Use a rod or tool through the center opening if increased leverage is required.
Compatibility: This 3/4" unit is designed for heavy-duty applications. Ensure your wire rope or chain is rated for the load capacity of a 3/4" turnbuckle.
Care: Clean away dirt and grit periodically. Apply a thin layer of machine oil or marine-grade lubricant to the threads to prevent corrosion and ensure the turnbuckle remains easy to adjust in outdoor conditions.