W4 Equal Straight 12mm Connector - FPS - 31204
Best current price£6.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£6.99Visit shop W4 Equal Straight 12Mm
Visit shopeBay£6.99Visit shop All Offers
4 offers from £6.99 - £7.99
View price history by clicking the chart icon.
Caravan Camper Pipe Quick Push Fit 12mm Straight JoinFree delivery in 1–3 days£7.40Visit shop →
W4 Push-Fit Water Pipe Connector Equal Straight 12mm Caravan Motorhome BoatFree delivery in 1–3 days£7.95Visit shop →
OnBuy.comW4 Push-Fit Equal Straight 12Mm Connector 5019328312042
Free delivery in 1–3 days
£7.99
Visit shop
Product Information
Full details
The FPS W4 Equal Straight 12mm Connector (MPN 31204) is designed for DIY and professional users in plumbing and fluid systems needing a reliable 12mm straight connection. Its primary benefit is the tool-free push-fit installation, ensuring quick and efficient setup. A potential caveat is ensuring the pipe is cut square and free of debris for a secure seal. This connector offers a straightforward solution for creating equal straight joins in tubing.
All features
| Model Part Number | 31204 |
|---|---|
| Brand | FPS |
Extended Product Information
FAQs
What is the primary advantage of this connector?
The primary advantage is its push-fit design, which allows for quick, tool-free installation and secure connections in 12mm plumbing systems.
What type of pipe does this connector work with?
It is designed for 12mm outside diameter rigid or semi-rigid pipes specifically made for push-fit systems. The pipe end must be clean and cut squarely.
Do I need any special tools to install it?
No, the push-fit design eliminates the need for special tools for installation. A disconnection tool may be needed for removal.
What is the part number for this connector?
The part number is 31204.
Can I use this connector with flexible tubing?
Generally, this connector is intended for rigid or semi-rigid pipe. Compatibility with flexible tubing depends on the tubing's specific rating for push-fit connectors.
How can I ensure a leak-proof connection?
Ensure the pipe end is cut squarely, free of burrs, and pushed in fully until it seats. The pipe must be compatible with push-fit systems.
What materials is this connector made from?
Specific material composition should be confirmed with the manufacturer's detailed product specifications, but typically these connectors use durable plastics and rubber seals.
Troubleshooting
Connector leaking after installation
Ensure the pipe is cut perfectly square and free of debris. Push the pipe in further to ensure it's fully seated. If the issue persists, the pipe end or the connector may be damaged and require replacement.
Pipe will not insert into the connector
Check that you are using the correct 12mm diameter pipe and that the pipe end is not deformed. Ensure the pipe end is clean and free of burrs. Slightly rotating the pipe while pushing can sometimes help.
Pipe pulls out of the connector
This indicates an insecure connection. Ensure the pipe was pushed in far enough to engage the internal gripping mechanism. Check for damage to the pipe end or the connector's internal collet. Replacement may be necessary.
Difficulty removing pipe from connector
Use the appropriate disconnecting tool for FPS push-fit connectors. Insert the tool around the pipe and push it firmly against the connector body to release the collet, then pull the pipe out.
Pros and Cons
Pros
- Extremely fast and easy installation without tools
- Reliable and secure connection for 12mm tubing
- Suitable for a wide range of plumbing and fluid systems
- Reduces installation time and labor costs
- No need for specialized tools or preparation beyond clean pipe ends
Cons
- Requires a clean, square cut on the pipe for a proper seal
- Not suitable for applications requiring significant flexibility or vibration dampening
- Removal may require a specific disconnecting tool, though often can be done by hand
- Limited to 12mm tubing size
- Can be susceptible to damage from excessive force during installation
Setup, Compatibility & Care
Setup:
- Ensure the end of the 12mm pipe is cut squarely and is free from burrs or imperfections.
- Mark the insertion depth on the pipe using a depth gauge or ruler. This is typically the insertion depth marked on the connector body or specified in the product manual.
- Carefully push the pipe into the connector until it reaches the marked depth. You should feel and hear the connector grip the pipe.
- Gently tug the pipe to ensure it is securely seated.
Compatibility:
- This connector is designed for 12mm outside diameter rigid or semi-rigid pipe specifically intended for push-fit systems.
- Ensure the fluid or gas being conveyed is compatible with the connector's materials (refer to manufacturer specifications if unsure).
- Not suitable for flexible hoses unless specifically rated for push-fit connectors.
Care:
- Keep the connector and pipe ends clean during installation.
- Avoid overtightening or applying excessive force, which can damage the seal or the pipe.
- Periodically inspect connections for any signs of leaks or damage, especially if used in critical systems.