JCP Fixings ETA Lipped Drop-In Anchors - M10 x 40 - Box of 50 - Silver

These anchors are designed for reliably attaching fixtures and fittings to solid concrete surfaces in construction and DIY projects.

Yes, the steel construction with a zinc-plated (ZYP) finish provides good corrosion resistance, making them suitable for many outdoor applications, though prolonged exposure to harsh environments may affect the finish.

Typically, a drill bit of 10.5mm or 11mm diameter is recommended for an M10 drop-in anchor. Always consult the product's specific technical data sheet for precise measurements.

No, these anchors are specifically designed for use in solid concrete. They are not suitable for brick, blockwork, or other types of masonry without specific adapters or prior engineering assessment.

ETA stands for European Technical Assessment. It signifies that the product has been assessed and meets essential requirements for safety, health, and environmental protection according to European standards.

After inserting the anchor into the clean, correctly sized hole, use a setting tool (like a drift punch) to strike the internal mandrel. This action expands the anchor body within the concrete, creating a secure grip.

The lipped end prevents the anchor from falling through the drilled hole during installation, making the process easier and more secure, especially when working overhead or in difficult positions.

Ensure the correct drill bit size and depth were used. Check that the hole was thoroughly cleaned before inserting the anchor. Verify that the setting tool was used correctly to expand the anchor's internal mandrel.

The concrete may be too soft, or the hole may have been drilled too large. Inspect the concrete quality. If the hole is oversized, a larger anchor or a different fixing method may be required.

Verify the drill bit size. If the hole is correct, ensure no debris remains in the hole or within the anchor itself. Gentle tapping might be required, but do not force the anchor.