Copper Metal Veneer Sheet - Lite Stone - 61Cm

No, this product is not suitable for wet areas such as shower walls or areas with constant high humidity due to the nature of the metal pigment and resin construction.

We recommend using the specific adhesives sold in our Adhesive, Sealer & Accessories collection, designed to work optimally with this metal veneer.

The thickness ranges between 2mm and 4mm.

For best results, the substrate should be smooth and flat. You may need to prepare or skim the wall before application if it has significant texture.

Clean gently with a soft, damp cloth. Avoid abrasive cleaners. For tougher spots, use a mild, diluted soap solution and wipe dry immediately.

The finish is designed for interior use and is protected by resin and sealant. However, like any metal finish, prolonged exposure to certain environmental factors could affect its appearance over time. Regular cleaning and sealing are recommended.

Yes, you can apply it over tiles, provided the tile surface is clean, smooth, and well-adhered. Using a tile backer board over the tiles first can provide a more stable and level surface.

Ensure the substrate is properly prepared (clean, dry, smooth). Use the correct amount and type of Lite Stone adhesive. Ensure even pressure is applied during installation and that the adhesive has sufficient time to cure.

Attempt to gently push bubbles towards the edge using a soft cloth or a squeegee before the adhesive fully cures. If cured, carefully puncture the bubble with a fine needle and press down.

Use a sharp utility knife or heavy-duty shears. Make multiple passes with a knife for a cleaner cut. Ensure the material is well-supported during cutting.

The finish might require cleaning or re-sealing. Use a damp cloth to clean, and if necessary, reapply a compatible sealer from the Lite Stone range.