AIM MyChron 2T Double Temperature Patch Lead - Double TC (Mignon) Plugs

This patch lead is designed for two TC (Thermocouple) sensors that utilize Mignon connectors. This typically includes Exhaust Gas Temperature (EGT) sensors and Underplug Temperature sensors from AIM or other compatible manufacturers.

No, this patch lead is specifically for AIM 2T models that support two temperature inputs. If your MyChron 5 only has a single temperature port, you would need a different type of patch lead.

TC (Thermocouple) plugs are used for thermocouple-based temperature sensors, while TR (often referring to a specific type like PT100 or K-Type sensor with a different connector) are for other types of temperature sensors. This patch lead uses TC Mignon plugs.

2T models are designed to accept two separate analog inputs for temperature sensors. Check your MyChron dash model number and specifications, or look for two distinct temperature input ports (often labeled 'TEMP 1' and 'TEMP 2', or a single 'TEMP' port on 2T units that accepts dual inputs via a specific lead).

The patch lead connects to the 3-pin (712) TEMP port located on the back of compatible AIM MyChron dashes.

Yes, this product is the patch lead that connects the sensors to the dash. You will need to purchase compatible temperature sensors separately.

Verify that both sensors are correctly and securely connected to the Mignon plugs. Ensure the sensors are compatible with TC (Mignon) connectors and function correctly on their own. Check the dash's software configuration for the correct channel setup. Inspect the patch lead for any visible damage.

Ensure sensor connections are tight. Check for any potential electromagnetic interference near the sensors or wiring. Inspect the patch lead and sensor wiring for any damage or chafing that might cause intermittent contact.

Confirm that your AIM MyChron dash is a 2T model and has the correct 3-pin TEMP port. This patch lead is specifically designed for the AIM 712 TEMP port.