Lisle Hose Cutter - 11420
Best current price£47.33from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£47.33Visit shop 11420 Hose Cutter 083045114208
Visit shopOnBuy.com£47.33Visit shop One Offer
1 offer from £47.33
View price history by clicking the chart icon.
Product Information
Full details
The Lisle Hose Cutter (11420) is designed for mechanics and DIYers needing to make clean, precise cuts on flexible hoses up to 1 1/4" in diameter, such as heater hoses and fuel lines. Its key benefit is the sharp, reversible stainless steel blade for extended life and a glass-filled nylon plier body for durability. A minor consideration is its specific capacity limit of 1 1/4", requiring a different tool for larger hoses.
All features
| Model Part Number | 11420 |
|---|---|
| Brand | Lisle |
Extended Product Information
FAQs
What is the maximum hose size this cutter can handle?
The Lisle Hose Cutter is designed to cut flexible hoses with an outer diameter of up to 1 1/4 inches.
Can this tool cut metal brake lines?
No, this hose cutter is specifically designed for flexible hoses made of rubber or soft plastic. It is not suitable for cutting metal tubing or rigid materials.
How do I ensure the longest life from the blade?
The stainless steel blade is reversible. You can flip it over to use the other cutting edge when one side becomes dull. Keeping the blade clean and lightly oiled during storage will also help prevent corrosion.
What material is the plier body made of?
The plier body is constructed from strong and durable glass-filled nylon.
Is any assembly required?
No, the hose cutter is ready for use upon arrival. The blade is pre-installed, but can be reversed or replaced if needed.
How much does the tool weigh?
The Lisle Hose Cutter weighs approximately 0.68 pounds, making it lightweight and easy to handle.
Troubleshooting
Hose is being crushed, not cut cleanly
Ensure the blade is sharp and properly aligned. Apply steady, even pressure when closing the handles. Check that the hose diameter does not exceed the 1 1/4" maximum capacity.
Blade seems dull or ineffective
The stainless steel blade is reversible. Flip the blade to use the other edge. If both sides are dull, the blade will need to be replaced.
Handles are difficult to close
Check for any debris or obstructions in the plier mechanism or around the blade. Ensure the blade retention screw is not overtightened, which can bind the mechanism. Clean and lubricate the pivot point if necessary.
Pros and Cons
Pros
- Provides clean, professional cuts on flexible hoses.
- Durable construction with glass-filled nylon.
- Reversible blade extends usability and value.
- Lightweight and easy to maneuver.
- Suitable for common automotive hose sizes up to 1 1/4".
Cons
- Limited to cutting hoses up to 1 1/4" diameter.
- Not designed for rigid tubing or metal pipes.
- Blade may require careful handling due to sharpness.
Setup, Compatibility & Care
Setup: The Lisle Hose Cutter is ready to use out of the box. Ensure the blade is securely in place before operation. To replace or reverse the blade, carefully unscrew the blade retention screw, flip or replace the blade, and re-tighten the screw. Always ensure the screw is snug to prevent the blade from dislodging during use.
Compatibility: This tool is designed for flexible hoses such as heater hoses, fuel lines, and other soft rubber or plastic tubing up to 1 1/4" in outer diameter. It is *not* suitable for cutting metal pipes, rigid plastic tubing, or hard materials.
Care: After each use, wipe the blade and plier mechanism clean of any debris or fluid residue. For long-term storage, apply a light coat of lubricating oil to the blade to prevent rust. Store the tool in a dry place, ideally with the blade covered or retracted to protect it and prevent accidental cuts.