Best current price£5.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.99Visit shop B&Q - 110 X 22.2mm Diamond Cutting DiscFor Tiles And Porcelain
Visit shop2 offers from £5.99 - £10.99
View price history by clicking the chart icon.
The UK Drills 180mm x 22.2mm continuous rim diamond cutting disc is designed for professionals and DIYers who require clean, chip-free cuts in challenging materials like porcelain, ceramic tile, and stone. Its laser-welded, continuous rim construction provides superior longevity and precision compared to standard abrasive discs, though users should ensure their angle grinder matches the 22.2mm arbor size before attempting installation.
| Brand | UK Drills |
|---|
While it is engineered for dry cutting, it can be used with water to help suppress dust and extend the life of the blade further.
Yes, the high-quality diamond matrix is suitable for cutting natural stone, including granite, provided you use steady, controlled pressure.
No, this disc is designed for a standard 22.2mm arbor and comes as a single unit without adapters.
Always refer to the speed rating stamped directly on the disc label; never exceed this RPM limit during operation.
Yes, it is an excellent choice for DIYers looking for a professional finish when cutting ceramic or porcelain wall and floor tiles.
Check that the disc is properly centered on the arbor and that the locking nut is tightened securely.
The diamonds may be glazed; make a few shallow cuts into a soft abrasive block to sharpen the edge.
Reduce the feed pressure and allow the blade to spin freely for a few seconds between cuts to dissipate heat.
To install, ensure your angle grinder is disconnected from the power source. Remove the outer locking nut, place the disc onto the 22.2mm spindle, and ensure the rotation arrow on the blade matches the direction of the grinder's rotation. Secure firmly with the locking nut.
Compatibility: This disc is specifically sized for 180mm angle grinders with a 22.2mm arbor. Do not attempt to use this disc with adapters that reduce the arbor size unless approved by the grinder manufacturer.
Care: Keep the disc clean of adhesive buildup. If cutting becomes sluggish, you can 'dress' the blade by making a few cuts through a soft abrasive material, such as a concrete paver, to expose fresh diamond grit.
