Vallejo Model Color - Liquid Mask

Drying time varies depending on the thickness of the application and the environmental conditions. Generally, allow 15-30 minutes for a thin coat to dry completely.

While the liquid mask is compatible with many paints, it's recommended to test it on a small, inconspicuous area first when using enamel paints to ensure compatibility.

The best way to remove the liquid mask is to gently rub it off with a soft eraser or a piece of cloth once the paint is fully dry.

Yes, the liquid mask is suitable for airbrush application. Dilute it slightly with water for a smooth spray.

Clean brushes and airbrushes with water immediately after use to prevent the mask from drying and clogging the tools.

The liquid mask is designed for single-use applications. Once removed, it cannot be reused.

The liquid mask can be used on various surfaces, including plastic, resin, metal, and paper.

If the mask tears during removal, try using a hobby knife or toothpick to gently lift the edge and peel it off slowly.

Ensure the mask is fully dry. If it still doesn't peel easily, try gently rubbing with a soft eraser or cloth. If the mask was applied too thickly, it may be more difficult to remove.

Make sure the mask is applied in a thin, even coat. Check for any gaps or imperfections in the mask's application. Ensure the paint is not too thin, which can cause it to seep under the mask.

Apply the mask in thinner layers. If the mask is already applied thickly, try using a slightly damp cloth or a soft eraser to aid in removal.

Dilute the mask with a small amount of water or airbrush thinner. Clean your airbrush thoroughly after use.