Legrand LEXIC Holder - 0 058 38
Best current price£34.54from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Tameson UK£34.54Visit shop Legrand Lexic Holder For Cylindrical Fuse - 005838
Visit shopTameson UK£34.54Visit shop All Offers
3 offers from £34.54 - £54.38
View price history by clicking the chart icon.
Tameson UKLegrand Lexic Holder For Cylindrical Fuse - 005838
Free delivery in 1–3 days
£34.54
Visit shop
Fuse Switch Cylindrical 3P Socket Without. 005838£13.20 delivery£54.38Visit shop →
Used Offer
1 offer from £19.80
View price history by clicking the chart icon.
eBayLegrand Fuse Carrier 05838 Isolating Fuse Carrier 10x38 500V 3-Pole
£30.13 delivery
£19.80
Visit shop
Product Information
Full details
This Legrand LEXIC holder (0 058 38) is designed for electrical professionals needing a secure and compliant mounting solution for 10x38mm cylindrical fuses. Its key benefit is providing a 3-pole, DIN rail mountable disconnector with IP20 protection for circuits up to 500V. A potential caveat is its specific fuse size compatibility, requiring users to ensure it matches their 10x38mm fuse requirements. The product acts as a non-fused switch disconnector, offering a reliable component for circuit isolation.
All features
| Series | LEXIC |
|---|---|
| Model Part Number | 0 058 38 |
| Brand | Legrand |
Extended Product Information
FAQs
What size fuses does this Legrand LEXIC holder support?
This holder is specifically designed for 10x38mm cylindrical fuses.
Can this holder be used in outdoor applications?
The holder has an IP20 rating, which provides basic protection against solid objects. It is not designed for outdoor use where it would be exposed to weather elements like rain or dust.
Is this product a fused switch or a switch disconnector?
This product is a non-fused switch disconnector. It allows you to disconnect power but does not contain an integrated fuse.
What is the maximum voltage this holder can handle?
The rated voltage for this holder is 500V.
How is this holder installed?
It is designed for standard 35mm DIN rail mounting, allowing for easy installation in electrical enclosures.
What does '3 poles' mean in the description?
It means the holder has three separate contacts that can be switched simultaneously, typically used for disconnecting all phases of a three-phase system or multiple single circuits.
Troubleshooting
Holder does not secure the fuse properly.
Verify that the fuse is the correct 10x38mm size. Ensure the fuse holder's internal mechanism is clean and not obstructed. Check for any visible damage to the holder's gripping components.
Device is difficult to mount on DIN rail.
Ensure the DIN rail is standard 35mm width and properly installed. Check that the mounting clips on the holder are not bent or damaged. Slide the holder onto the rail firmly until it clicks into place.
Overheating during operation.
Confirm that the fuse rating does not exceed the holder's 500V limit and that the connected circuit's load is within the holder's capacity. Check all electrical connections for tightness, as loose connections can cause resistance and heat.
Switch mechanism feels stiff or unresponsive.
Ensure the unit is de-energized. Gently attempt to operate the switch. If stiffness persists, check for external obstructions. Avoid forcing the mechanism, as this may cause damage.
Pros and Cons
Pros
- Securely holds 10x38mm cylindrical fuses.
- Easy DIN rail mounting for quick installation.
- 3-pole design allows for multi-circuit control.
- Rated for up to 500V, suitable for many applications.
- Provides reliable circuit isolation as a switch disconnector.
Cons
- Limited to 10x38mm fuse sizes.
- IP20 rating offers limited protection against dust and water.
- Requires separate fuse installation (non-fused unit).
Setup, Compatibility & Care
Setup:
- Mounting: Securely attach the holder to a standard DIN rail (35mm width) within an appropriate enclosure.
- Fuse Installation: Open the holder mechanism according to its design and insert a compatible 10x38mm cylindrical fuse.
- Wiring: Connect the incoming power wires to the designated terminals and the outgoing wires to the load terminals, ensuring proper torque and connection.
- Operation: Use the integrated switch mechanism to connect or disconnect the fuse and thus the circuit.
Compatibility:
- Fuse Size: Compatible only with 10x38mm cylindrical fuses.
- Mounting: Designed for standard 35mm DIN rail.
- Voltage: Suitable for systems operating up to 500V.
Care:
- Regularly inspect the holder for any signs of damage or wear.
- Ensure connections remain clean and tight.
- Avoid exposure to excessive moisture, dust, or corrosive environments beyond its IP20 rating.
- Cleaning should be done with a dry or slightly damp cloth, ensuring the unit is powered off and disconnected before any cleaning.