Lithofin Protective Impregnator - 1L - WPRIM1
Best current price£55.82from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£55.82Visit shop Lithofin KF Protective Impregnator Ceramic & Porcelain Sealer - 1 Litre
Visit shopeBay£55.82Visit shop One Offer
1 offer from £55.82
View price history by clicking the chart icon.
eBayLithofin KF Protective Impregnator Ceramic & Porcelain Sealer - 1 Litre
£8.34 delivery
£55.82
Visit shop
Product Information
Full details
This guide is for homeowners and professionals seeking to protect fully vitrified porcelain and ceramic tiles, especially polished surfaces, from stains and everyday wear. The key benefit is the creation of an invisible barrier that repels water, oil, and dirt, while maintaining the tile's original look and facilitating easier cleaning. A potential caveat is that it requires proper application for optimal, long-lasting results.
All features
| Model Part Number | WPRIM1 |
|---|---|
| Brand | lithofin |
Extended Product Information
FAQs
What types of tiles can I use Lithofin Protective Impregnator on?
It is specifically formulated for fully vitrified porcelain and ceramic tiles, including polished and unpolished finishes. It is also effective on grout lines. Always perform a test on a small, inconspicuous area first.
Does this product change the look of my tiles?
No, the formula is designed to create an invisible barrier and does not alter the original appearance, color, or texture of the tile surface.
How long does the protection last?
The longevity of the protection depends on traffic, cleaning methods, and environmental factors. Regular maintenance with appropriate cleaners will help preserve the protective qualities. Reapplication may be necessary over time, typically after several years in moderate use areas.
Can I use this product outdoors?
Yes, Lithofin Protective Impregnator is suitable for both indoor and outdoor use.
Is it safe to use in my kitchen or bathroom?
Yes, the water-based, low-odor, solvent-free formula makes it safe for indoor use in kitchens, bathrooms, and other living areas.
How do I clean the protected tiles?
Clean treated surfaces with mild, pH-neutral detergents. Avoid using abrasive cleaners, strong acids, or alkaline products, as these can diminish the effectiveness of the impregnator.
How much area does one liter cover?
The yield is high, but specific coverage depends on the porosity of the tile and grout. Refer to the product's technical data sheet for precise coverage estimates.
Troubleshooting
Uneven sheen or patchy appearance after application
This can occur if the product was applied unevenly or not worked into the surface properly. Ensure the product was applied thinly and consistently. Buffing the surface with a clean, dry cloth after drying might help blend the appearance. For severe issues, re-application after thorough cleaning may be necessary.
Product leaves a visible film or residue
Excess product may have been left on the surface. Ensure all excess was wiped off during application as per instructions. Try to remove the residue with a cleaner recommended for the specific tile type and re-apply if necessary, ensuring a thinner coat this time.
Surface still stains easily
The impregnator may not have fully cured, or the application was insufficient. Ensure the surface has had adequate time to cure (up to 48 hours). Check if the product was applied in a thin, even layer and if grout lines were adequately treated. Re-application might be needed.
Pros and Cons
Pros
- Effectively repels water, oil, and dirt.
- Maintains the original appearance of the tile.
- Makes cleaning significantly easier.
- Suitable for both indoor and outdoor applications.
- Low odor and solvent-free, safe for interior use.
- Protects both tiles and grout lines.
Cons
- Requires proper application for best results.
- May not be suitable for all types of tile finishes (test recommended).
- Does not provide physical abrasion resistance.
- Effectiveness can diminish over extended periods without reapplication.
Setup, Compatibility & Care
Preparation: Ensure the tile and grout surfaces are clean, dry, and free from any existing sealers or treatments. For new installations, wait for grout to fully cure as per manufacturer instructions.
Application: Apply Lithofin Protective Impregnator using a suitable applicator (e.g., roller, brush, or cloth) in a thin, even coat. Work in manageable sections. For porous surfaces, a second cross-coat may be applied after a short interval, as recommended by the product instructions.
Drying: Allow the treated surface to dry completely, typically for several hours, before allowing foot traffic or exposing it to moisture. Full cure may take up to 48 hours.
Compatibility: Primarily designed for fully vitrified porcelain and ceramic tiles, including polished finishes. It is also suitable for grout lines. Always test on an inconspicuous area first, especially on unusual or unglazed surfaces.
Care: Clean treated surfaces with neutral, pH-balanced cleaners. Avoid harsh or abrasive cleaners, as they can degrade the protective treatment over time. Regular cleaning will maintain the effectiveness of the impregnator.