Best current price£30.10from eBay
Shopping.co.uk recommended and popular offers
eBay£30.10Visit shop Varilight XDB96S Screwless Brushed Brass 6 Gang 1 or 2 Way Rocker Light Switch
Visit shop
B&Q£30.98Visit shop B&Q - 6-Gang Rocker Light Switch 2-WayScrewless Brushed Brass With Polished Brass RockersXdb96S
Visit shop6 offers from £30.10 - £36.93
View price history by clicking the chart icon.
The Varilight 6-Gang 10A 1- or 2-Way Rocker Light Switch is designed for homeowners and electricians seeking a refined, minimalist aesthetic for controlling multiple lighting zones from a single location. It provides a clean, screwless finish that integrates seamlessly into modern interiors, though users should note that it requires a minimum back-box depth of 25mm, necessitating a careful check of existing wall conditions before installation.
| Colour | Gold |
|---|---|
| Model Part Number | XDB96S |
| Brand | Varilight |
Yes, this switch is designed for both 1-way and 2-way switching applications.
Yes, for safety and correct operation, the metal casing must be earthed.
You need a wall box with a minimum depth of 25mm.
Yes, it is compatible with both mains and low-voltage lighting, provided the total load is within the 10A rating.
Use a small flat-head screwdriver to gently release the clips from the bottom of the plate.
Yes, it comes with a 10-year guarantee from Varilight.
Ensure the mounting frame is screwed tightly to the wall box and that the screwless plate is fully clicked into the locking tabs.
Verify that all electrical connections are secure and that the lighting load does not exceed the 10A total capacity of the switch.
Check if the wall box is recessed enough; if the box is less than 25mm deep, the plate will not sit correctly.
Installation requires a standard UK wall box with a minimum depth of 25mm. Ensure that the main power supply is isolated at the consumer unit before beginning any electrical work. The unit must be connected to a dedicated earth wire to comply with safety regulations. For installation, attach the mounting frame to the wall box, then carefully snap the decorative screwless plate into position. To keep the Gold finish looking pristine, clean only with a soft, dry cloth; avoid using abrasive chemicals or household cleaners that could damage the surface coating.
