Polypipe Swept Bend - 50mm - White
Best current price£7.40from Bradfords
Best offers
Shopping.co.uk recommended and popular offers
Bradfords£7.40Visit shop Polypipe Ws52w Swept Bend 50Mm X 92.5Deg Waste Solvent Weld Abs White
Visit shopBradfords£7.40Visit shop One Offer
1 offer from £7.40
View price history by clicking the chart icon.
BradfordsPolypipe Ws52w Swept Bend 50Mm X 92.5Deg Waste Solvent Weld Abs White
£25.00 delivery
£7.40
Visit shop
Product Information
Full details
The Polypipe WS52W 50mm White Swept Bend is designed for plumbers and DIY enthusiasts needing to create a smooth, 92.5-degree directional change in 50mm ABS solvent weld waste systems. Its key benefit is providing reliable, permanent jointing for efficient liquid waste drainage from household sanitaryware and appliances. A potential caveat is that it requires specific ABS solvent weld cement for installation, which is not included.
All features
| Model Part Number | WS52W |
|---|---|
| Brand | Polypipe |
Extended Product Information
FAQs
What type of adhesive should I use for this fitting?
You must use a solvent weld cement specifically designed for ABS plastic waste pipes. Ensure it is suitable for permanent jointing.
Can this be used with push-fit or compression fittings?
No, this fitting is exclusively for ABS solvent weld systems. It requires solvent cement for a permanent, secure joint and is not compatible with push-fit or compression systems.
What is the angle of the swept bend?
The angle of this swept bend is 92.5 degrees, providing a smooth, gradual change in direction.
Is this suitable for hot water waste?
The ABS material performs at higher operating temperatures than some plastics, but it is primarily designed for standard household waste water temperatures. For very high-temperature applications, consult specific system requirements.
How do I clean this fitting if it gets dirty?
Wipe with a damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic surface.
What other Polypipe components are compatible with this bend?
This 50mm white ABS swept bend is part of the Polypipe Solvent Weld Waste (ABS) range and is compatible with other fittings, traps, and overflow solutions within that specific system.
Can I paint this fitting?
While possible, painting is not recommended as it can affect the material properties or potentially obscure joint integrity. The white finish is designed for a clean aesthetic.
Troubleshooting
Joint leaks after installation
Ensure proper surface preparation (cleaning) and adequate application of ABS solvent weld cement. Check that the pipe was fully inserted and held in place during the initial setting period. Re-joint if necessary, ensuring all surfaces are clean.
Difficulty inserting pipe into fitting
Confirm that the pipe diameter and fitting size are correct (both 50mm ABS). Ensure the pipe end is cut squarely and chamfered slightly. Use an appropriate ABS cleaner to soften the surfaces if needed, and ensure even cement application.
Slow drainage through the system
The swept bend itself is designed for smooth flow. Slow drainage is typically caused by blockages further down the waste line, in traps, or at the main drain connection. Clean accessible traps and overflow components.
Pros and Cons
Pros
- Provides a smooth transition for waste flow, minimizing blockages.
- Durable ABS material offers resistance to impact and higher operating temperatures.
- Solvent weld jointing creates secure, long-lasting connections.
- White color offers a clean appearance in visible installations.
- Integrates with a wide range of Polypipe waste system components.
Cons
- Requires specific ABS solvent weld cement for installation.
- Only suitable for 50mm ABS solvent weld systems.
- Not designed for high-pressure applications.
- Permanent joint means repositioning or removal requires cutting.
Setup, Compatibility & Care
Setup:
- Ensure the ends of the pipe and the fitting socket are clean and dry. A specific cleaner for ABS solvent weld systems may be required.
- Apply a small amount of ABS solvent weld cement evenly to both the pipe end and the inside of the fitting socket.
- Immediately push the pipe into the socket with a slight twisting motion until it bottoms out.
- Hold the joint firmly for 30 seconds to prevent movement while the cement begins to set.
- Wipe away any excess cement with a clean cloth.
- Allow adequate drying time as per the solvent cement manufacturer's instructions before running water through the system.
Compatibility:
- This fitting is designed for 50mm ABS solvent weld waste systems.
- It is compatible with other Polypipe Solvent Weld Waste (ABS) components, including traps and overflow systems.
- Ensure that any other components used in the system are also rated for solvent weld jointing and suitable for waste water.
Care:
- The ABS material is generally maintenance-free.
- In case of visible dirt, clean with a damp cloth. Avoid abrasive cleaners or solvents not intended for plastic.
- Regularly check connected appliances and traps for blockages, rather than the bend itself, as it's a permanent fixture.