Owatrol Oil - 1 L

Typically, you can add up to 25% Owatrol Oil by volume to your oil-based paint. Always refer to the paint manufacturer's instructions for specific recommendations.

No, Owatrol Oil is designed for use with oil-based paints, varnishes, and stains only. It is not compatible with water-based products.

Owatrol Oil can be used on a variety of surfaces, including metal and wood, to inhibit rust and improve paint adhesion. It works best on items that will be painted with oil-based products.

Yes, Owatrol Oil penetrates to the sound metal and drives out moisture and air, thereby stabilizing existing rust and preventing future rust formation.

Clean your brushes, rollers, and other tools with mineral spirits immediately after use.

Store Owatrol Oil in a cool, dry place. Keep the container tightly sealed when not in use.

Ensure the surface is properly prepared, clean, and free of contaminants. Make sure the paint is compatible with Owatrol Oil and allow adequate drying time.

Thoroughly remove loose rust before application. Apply a sufficient amount of Owatrol Oil to fully penetrate the rust. In severe cases, multiple coats may be needed.

Ensure proper mixing with the paint and use a high-quality brush or roller. Apply thin, even coats, and avoid overworking the paint.