Best current price£27.50from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£27.50Visit shop Trend Chamfer V Groove Cutter Angle=45 Degrees Pk 1 C044ax1/4Tc
Visit shop3 offers from £27.50 - £32.99
View price history by clicking the chart icon.
This Trend CraftPro Router Cutter Bit is designed for professional woodworkers and serious DIYers seeking precise decorative V-groove cuts. Its key benefit is the durable Tungsten Carbide Tipped construction combined with a non-stick coating for extended sharpness and clean results, especially on hardwoods and man-made boards. A potential caveat is the specific 45-degree V-groove angle, which may not suit all decorative applications.
| Model Part Number | C044AX1/4TC |
|---|---|
| Brand | Trend |
This bit is suitable for cutting softwood, hardwood, and man-made timber boards such as MDF and plywood.
The PTFE coating reduces friction during cutting and prevents resin and glue build-up on the bit, leading to a cleaner cut and extending the cutter's lifespan.
Tungsten Carbide Tipping (TCT) makes the cutting edges extremely hard and durable, allowing the bit to stay sharper for longer and maintain precision across many uses.
The bit creates a 45-degree V-groove with a cut diameter of 19.1mm. The depth of the cut depends on how deeply the bit is set into the material during routing.
The Safety K-Mark indicates the minimum safe depth to which the bit shank should be inserted into the router's collet, ensuring a secure and safe hold.
Yes, the 45-degree V-groove angle is ideal for creating decorative chamfers on the edges of wooden components.
Ensure the bit is securely tightened in the collet and that the router speed is appropriate for the material. Check for any resin build-up or damage on the cutting edges. Ensure the material is firmly supported.
Verify that the bit is correctly seated in the collet and that the collet is clean. Check that the router itself is in good working order. Ensure the material being cut is stable.
Clean the bit thoroughly after each use with a recommended solvent and a soft brush. The PTFE coating helps minimize build-up, but regular cleaning is still essential.
Setup: Ensure the router collet is clean and compatible with a 1/4 inch shank. Insert the shank into the collet, paying attention to the Safety K-Mark for optimal positioning, and tighten securely according to your router's manual. Always wear appropriate safety glasses and hearing protection.
Compatibility: This bit is compatible with any standard handheld router or router table that accepts a 1/4 inch shank. It is designed for use on softwood, hardwood, and man-made timber boards.
Care: After use, clean the bit to remove any dust or resin. A soft brush and a mild solvent can be used if necessary. Avoid abrasive cleaners. Store the bit in a dry place, ideally in its original packaging or a protective case, to prevent damage.
