Best current price£241.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£241.00Visit shop B&Q - Flat Coloured Vertical RadiatorMoon Dust1600mm X 420mm Single
Visit shop2 offers from £241.00
View price history by clicking the chart icon.
The Lux Heat Flat Coloured Vertical Radiator in grey is an ideal solution for homeowners looking to modernize their heating system with a space-saving, aesthetic design. Designed for both contemporary and traditional interiors, this 1600mm x 420mm vertical unit provides a reliable heat output of 2293 BTU (672W) to keep rooms comfortable. While its sleek flat-panel profile maximizes wall space, users should note that as a made-to-order, hand-finished product, it is non-returnable, making careful measurement and planning essential before purchase.
| Colour | Grey |
|---|---|
| Model Part Number | 1503388 |
| Brand | Lux Heat |
No, valves are not included. You will need to purchase standard 1/2 inch BSP valves separately.
No, this item is made to order and hand-finished, so it is strictly non-returnable.
The radiator has a heat output of 2293 BTU (672W).
Yes, the product comes with wall fixings, brackets, a bleed valve, and a blanking plug.
This radiator is covered by a 5-year manufacturer warranty.
Yes, it is designed for use with standard central heating systems using a 1/2 inch BSP connection.
Check if air is trapped inside the radiator and use the provided bleed valve to release it.
Ensure the 1/2 inch BSP connections are properly tightened and verify that the correct sealant or PTFE tape was used on the threads.
The system may require balancing. Check the lockshield valve settings on this radiator and others in the house to ensure flow is consistent.
Installation of the Lux Heat radiator requires a standard plumbing setup using 1/2 inch BSP valves. Since valves are not provided in the box, ensure you have compatible ones ready before starting the plumbing work.
For ongoing care, wipe the grey finish periodically with a soft, damp cloth. Avoid using abrasive cleaning agents or steel wool, as these can damage the hand-finished coating. If you notice cold spots over time, perform a routine bleed to maintain maximum efficiency.
