Setup, Compatibility & Care
Setup
- Preparation: Ensure your vehicle is on a level surface and the engine is off.
- Locate Fill/Drain Plugs: Identify the fill and drain plugs on your axle.
- Drain Old Oil: Remove the drain plug and allow the old oil to drain completely.
- Replace Drain Plug: Once drained, reinstall the drain plug, ensuring it's properly tightened.
- Fill with New Oil: Use a suitable pump or applicator to fill the axle with Liqui Moly Hypoid Gear Oil LS SAE 85w90 GL5 to the manufacturer's recommended level. Consult your vehicle's manual for the correct capacity.
- Check for Leaks: After filling, check for any leaks around the fill and drain plugs.
Compatibility
This oil is compatible with axle drives that require a GL5 specification and is particularly suited for those with limited-slip differentials. It meets or exceeds the following specifications: API GL 5, MIL-L 2105 D, and is recommended for DAF, GM B 040 1010, Volvo (axle/limited slip differential), and ZF TE-ML 05C/21C.
Care
- Regular Inspection: Check the oil level and condition regularly.
- Adhere to Service Intervals: Follow the manufacturer's recommended service intervals for oil changes.
- Proper Disposal: Dispose of used oil responsibly at a designated recycling center.