Setup, Compatibility & Care Instructions
Compatibility: Before installation, verify that the Mann Oil Filter W11102/15 is listed as compatible with your vehicle's make, model, and year. Refer to your vehicle's owner manual or a reliable parts catalog for cross-referencing. The dimensions (height: 274 mm, inner diameters: 93 mm/103 mm, outer diameter: 108 mm) and thread size (1 1/8-16 UN) are critical for a correct fit.
Setup:
- Ensure the engine is cool.
- Locate the oil filter on your vehicle.
- Using an oil filter wrench, carefully unscrew the old filter.
- Lightly lubricate the rubber gasket on the new Mann Oil Filter W11102/15 with a small amount of clean engine oil.
- Screw the new filter on by hand until the gasket makes contact with the mounting surface, then tighten an additional 3/4 to 1 full turn by hand, or as specified by the vehicle manufacturer.
- Refill the engine with the correct type and amount of oil.
- Start the engine and check for leaks around the filter.
Care: This filter is designed for single-use and replacement during routine oil changes. There is no specific user maintenance required for the filter itself. Adhere to the vehicle manufacturer's recommended oil change intervals, which typically include filter replacement.