Best current price£35.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£35.00Visit shop National Skirting White Groove I Primed Skirting Board 18Mm 170 X 4200Mm
Visit shop
B&Q£39.46Visit shop - National Skirting Groove I Mdf Skirting Board170mm X 18mm X 4200mmPrimedNo Rebate
Visit shop4 offers from £35.00 - £39.46
View price history by clicking the chart icon.
The National Skirting Groove I MDF Skirting Board in White is designed for homeowners looking to add a distinctive, elegant touch to their interior spaces. Its unique groove profile offers a modern yet classic aesthetic, ideal for both contemporary and traditional homes. The key benefit is its versatile primed finish, allowing for custom painting to perfectly match any decor. A potential caveat is the need for careful handling during installation to avoid chipping the MDF. This skirting board serves to protect walls and conceal the floor-wall joint, providing a seamless finish. Key features include its durable MDF construction, 4.2-meter length for fewer joins, and a sophisticated white primed surface ready for finishing.
| Colour | White |
|---|---|
| Series | Groove I |
| Brand | National Skirting |
After installation and any necessary filling/sanding, apply a good quality primer suitable for MDF. Once the primer is dry, apply 2-3 thin coats of your chosen topcoat (e.g., eggshell, satin, or gloss paint), allowing adequate drying time between coats for a smooth, durable finish.
While MDF is durable, it is not inherently water-resistant. It is best suited for dry interior environments. If used in a bathroom, ensure it is thoroughly sealed and protected with moisture-resistant paint, and avoid areas with direct water splash.
To achieve a seamless look, use the full 4.2-meter length where possible. When joining boards, ensure precise cuts (butt joints or mitre joints) and use wood filler to disguise the seam before painting. Alternatively, plan your cuts so joins fall in less visible areas or behind furniture.
A sharp handsaw with a fine-toothed blade or an electric mitre saw is recommended for clean cuts. Ensure the blade is suitable for MDF to minimize tear-out and chipping. A mitre box can also be helpful for accurate angle cuts.
The skirting board has a thickness of 18mm and a height of 170mm.
It is generally recommended to lightly sand the primed surface with fine-grit sandpaper and wipe away dust before applying paint. This ensures better adhesion for your chosen finish.
Use a sharp, fine-toothed saw blade designed for cutting MDF. Ensure the board is firmly supported during cutting and consider using a mitre box for accurate angles.
Ensure the wall surface is properly prepared (clean, dry, and sound). Use a high-quality adhesive specifically recommended for MDF and skirting boards. Apply sufficient adhesive and ensure the board is held in place until the adhesive begins to set.
Ensure the primed surface is lightly sanded and wiped clean before painting. Apply thin, even coats of your chosen paint, allowing adequate drying time between each coat. Use a good quality primer and topcoat suitable for MDF.
Carefully fill the damaged area with an MDF-compatible filler. Once dry, sand the filler smooth to match the surrounding profile. Touch up with primer and then your final paint color.
Setup:
Compatibility:
Care:
