Diamond Pedals Boost/EQ Effects Pedal - DM-BOOSTEQ
Best current price£199.00from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£199.00Visit shop Diamond Boost/EQ Effects Pedal
Visit shopeBay£199.00Visit shop One Offer
1 offer from £199.00
View price history by clicking the chart icon.
Product Information
Full details
The Diamond Pedals Boost/EQ (DM-BOOSTEQ) is designed for guitarists seeking transparent signal enhancement and precise tonal shaping without unwanted compression. Its key benefit is providing a dynamic, high-fidelity sound that adds punch and clarity to any setup. A potential caveat is its lack of built-in compression, requiring separate consideration for dynamics control. This versatile pedal merges a clean boost with an adaptable EQ, drawing from the acclaimed gain stages of the Diamond Compressor.
All features
| Model Part Number | DM-BOOSTEQ |
|---|---|
| Brand | Diamond Pedals |
Extended Product Information
FAQs
What type of power supply does the Diamond Boost/EQ require?
It requires a standard 9V DC center-negative power supply with a 2.1mm barrel connector. A power supply is not included with the pedal.
Can I use this pedal with a bass guitar?
Yes, the Diamond Boost/EQ is designed to be transparent and versatile, making it suitable for both guitar and bass.
Does this pedal add any compression to the signal?
No, this pedal is specifically designed as a 'compressor-less' unit, focusing solely on transparent clean boost and EQ functions.
How do I get the most out of the EQ section?
Experiment with small adjustments to each frequency band. Boost or cut specific frequencies to enhance presence, warmth, or clarity depending on your needs and the surrounding gear.
Is the boost level adjustable?
Yes, the 'Boost' knob controls the amount of clean volume increase, allowing you to set anything from a subtle lift to a significant jump in volume.
Can I use it to drive an amplifier into overdrive?
Absolutely. The clean boost function can effectively push your amplifier's input stage, encouraging natural tube overdrive for a richer tone.
Troubleshooting
No sound or signal passes through the pedal.
Ensure the power supply is correctly connected and providing adequate voltage. Check all audio cable connections are secure at both ends.
Excessive noise or hum.
Verify that the power supply is a quality, regulated unit. Try powering the pedal with a different power supply or batteries if applicable. Ensure audio cables are properly shielded.
Boost is not loud enough.
Turn up the 'Boost' knob. Ensure the EQ frequencies are not set to cut volume overall. Check your amplifier and instrument volume settings.
EQ adjustments have no apparent effect.
Ensure the 'EQ' switch (if present) is engaged. Verify that the affected frequency bands are not set to neutral (0dB). Check if the 'Boost' knob is turned all the way down, which may mask EQ changes.
Pros and Cons
Pros
- Provides a very clean and transparent boost.
- EQ section is highly effective for fine-tuning tone.
- Built with high-quality, low-noise components.
- Adds desirable punch and clarity to the guitar signal.
- Versatile for various musical styles and performance needs.
Cons
- Does not include compression, which may be a desired feature for some players.
- Requires external power supply (not included).
- EQ controls might have a steeper learning curve for beginners.
- The 'compressor-less' design means dynamic control needs separate solutions.
Setup, Compatibility & Care
Setup:
- Connect your instrument's output to the pedal's input jack.
- Connect the pedal's output jack to your amplifier's input or the next pedal in your chain.
- Connect a standard 9V DC center-negative power supply (2.1mm barrel connector) to the power input.
Compatibility:
- Compatible with standard 9V DC center-negative power supplies.
- Works with most electric guitar and bass setups.
- Can be placed anywhere in your signal chain, though often used towards the end for a final boost or towards the beginning to boost amp input.
Care:
- Keep the pedal dry and away from extreme temperatures.
- Clean the exterior with a dry or slightly damp cloth; avoid abrasive cleaners.
- Protect the footswitch and knobs from impact.