This ready-to-use, coloured solution from Bond It is designed for use on concrete, block paving, p...This ready-to-use, coloured solution from Bond It is designed for use on concrete, block paving, paving slabs, walling, and roof tiles. It enhances the appearance and extends the lifespan of coloured concrete and block paving. The sealer protects against water penetration, oil or grease spills, and dirt/grime build-up. It restores colour, reduces staining, and features a UV-stable, solvent-free formulation with low odour. The product contains fungicide to inhibit organic growth and facilitates easier cleaning. It improves water and UV resistance. No dilution is required; stir well before use and periodically during application. A test on a small, inconspicuous area is recommended to determine the required depth of colour. Always use tubs from the same batch for colour matching. Apply with a brush or lambswool roller, avoiding over-application or puddling. Drying time is 1-2 hours on a dry, sunny day, but cold or humid conditions will slow drying. Do not traffic for approximately 3-4 hours after application. Only to be used in conjunction with other Bond It Drive Alive products.
This ready-to-use coloured solution from Bond It is designed for homeowners and DIY enthusiasts looking to restore and protect exterior concrete and paving surfaces. It effectively enhances colour, guards against stains and weathering, and extends the lifespan of driveways, patios, and walls. A key caveat is the need to test colour depth in an inconspicuous area and use tubs from the same batch for consistent results.
All features
Colour
Brown
Brand
Bond it
Extended Product Information
FAQs
Do I need to dilute the Bond It Drive Alive Colour Enhancer?
No, this product is ready-to-use and does not require dilution. Stir well before and during application.
How many coats should I apply?
Generally, one even coat is sufficient. Apply thinly to avoid puddling. If a deeper colour is desired, a second light coat can be applied after the first has dried, but always perform a test patch first.
What surfaces can I use this on?
It is designed for use on concrete, block paving, paving slabs, walling, and roof tiles.
How long does it take to dry?
On a dry, sunny day, it typically dries in 1-2 hours. Cold or humid conditions will slow down the drying process. Avoid traffic for 3-4 hours.
Can I use tubs from different batches?
It is strongly recommended to use tubs from the same batch for colour matching and consistency across the entire application area.
What if it rains after application?
Avoid applying if rain is forecast. If light rain occurs after the initial drying period (1-2 hours), it may not cause significant issues, but heavy rain could wash away uncured product. Ensure adequate drying time before exposure to the elements.
How does the fungicide work?
The fungicide additive helps to inhibit the growth of organic matter like moss and algae on the treated surface, contributing to a cleaner appearance and reducing slip hazards.
Can I use this product with other sealers or paints?
This product should only be used in conjunction with other Bond It Drive Alive products for optimal performance and compatibility.
Troubleshooting
Uneven colour after application
This can result from over-application or uneven spreading. Ensure the product is applied thinly and evenly. If it's a minor issue on drying, a second light coat might help. Always stir the product well before and during use, and ensure tubs are from the same batch.
Product not drying
Check the weather conditions. Cold or humid environments significantly slow down drying times. Ensure the surface is not in direct shade or exposed to rain. Avoid application if rain is forecast.
Puddles or sticky patches remaining
This indicates over-application. Try to spread the product thinly. If puddles have formed, attempt to brush them out or carefully wipe away excess before it fully dries. Avoid walking on these areas until fully cured.
Colour is too dark or too light
This is why a test area is essential. If the colour is not as desired, and the product has not fully cured, it may be possible to carefully remove some excess. For significant discrepancies, a second coat with a different Bond It Drive Alive product might be considered after full curing, or a re-treatment may be necessary following manufacturer guidelines.
Pros and Cons
Pros
Enhances the aesthetic appeal of paved surfaces.
Provides effective protection against common stains and weathering.
Easy to apply with no dilution needed.
Helps prevent organic growth like moss and algae.
Durable, UV-stable finish.
Cons
Requires testing for colour depth to avoid unexpected results.
Colour matching can be an issue if tubs from different batches are used.
OnBuy.com£29.79Visit shop 
B&Q£39.99Visit shop 
