Best current price£11.19from eBay
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Autotek Volkswagen Tungsten Silver Fast Drying Aerosol Spray Paint 300ml
Visit shop4 offers from £11.19 - £12.99
View price history by clicking the chart icon.
This Autotek Tungsten Silver aerosol spray paint is designed for automotive touch-ups and repairs, offering an exact colour match for specific Volkswagen models (Passat, Toureg, CC, Golf from 2009 onwards) and compatibility with most automotive finishes. Its key benefit is a fast-drying, durable, and high-quality finish with precise colour matching. A caveat is the need for application in well-ventilated areas and specific temperature ranges.
| Colour | Silver |
|---|---|
| Model Part Number | ATOMC276300 |
| Brand | Autotek |
| Container Volume | 300ml |
This Autotek Tungsten Silver aerosol is an exact match for Volkswagen Passat, Toureg, CC, and Golf models from 2009 onwards, using the manufacturer paint code B7W or LB7W.
Yes, while it is an exact match for specific Volkswagen models, the paint is compatible with nearly all automotive paint finishes and can be used for general touch-ups on other makes and models.
The paint provides a strong and durable coat suitable for application on metal, glass fibre, and rigid plastic surfaces.
The paint should be touch dry in approximately 10-20 minutes after application. It requires a full 24 hours to cure completely.
While not strictly mandatory for all uses, applying a minimum of two coats of Autotek Grey Primer or a compatible primer is recommended for optimum adhesion and the best possible professional finish.
The paint should be applied outdoors or in a well-ventilated area at temperatures between 15°C and 25°C. Avoid humid conditions.
After each use, turn the aerosol can upside down and spray for 2-5 seconds to clear any residual paint from the nozzle.
Turn the aerosol upside down and spray for 2-5 seconds after each use to clear the nozzle. If blockage persists, try gently warming the nozzle in warm water (do not heat the can).
Ensure thin coats are applied, with adequate drying time between them. Maintain the recommended spraying distance (15-25cm) and avoid applying too much paint at once.
Verify that the surface was properly cleaned and prepared before application. Ensure primer was used as recommended for optimal results.
Check the ambient temperature; it should be between 15°C-25°C. Ensure adequate ventilation and avoid applying in humid conditions.
Preparation is crucial for the best results.
Application Steps:
Important Conditions:
Compatibility:
