Prima Plus Compression Adaptor - 6mm x 1/4"

The Prima Plus fittings are manufactured using high-quality brass compliant with modern safety standards suitable for drinking water.

Compression olives deform during the initial tightening process to create a seal; it is highly recommended to use a new olive if the joint is disassembled.

Yes, these components are suitable for gas installation projects, provided the work is carried out by a qualified technician in accordance with local regulations.

You will need a tube cutter to ensure a square pipe end and two adjustable wrenches—one to hold the body and one to tighten the nut.

Yes, the assembly includes the main brass body, the compression nut, and the olive required for a standard installation.

Compression fittings are primarily designed for copper or brass pipes. If using plastic pipe, you must ensure a compatible pipe insert is used to prevent the pipe from collapsing.

Ensure the pipe is pushed fully into the fitting and the olive is properly seated; try tightening the nut by an additional quarter turn.

Check for cross-threading or debris in the threads; ensure the threads are aligned perfectly before rotating.

Ensure the pipe end is not flared or damaged; lightly deburring the edge of the pipe can help.