Setup, Compatibility & Care
Before starting, ensure your workspace is well-ventilated and the ambient temperature is between 15°C and 25°C.
- Preparation: Clean the target area thoroughly to remove all grease, dirt, and wax. Use masking tape to protect adjacent sections.
- Priming: For bare metal or plastic, apply at least two coats of a suitable automotive primer to ensure long-term adhesion.
- Mixing: Shake the aerosol can vigorously for at least two minutes before use to ensure the pigments are properly suspended.
- Application: Hold the can 15-25cm from the surface and use steady, overlapping strokes.
- Maintenance: After use, invert the can and spray briefly to clear the nozzle. Store in a cool, dry place away from direct sunlight.