Tyvek Acrylic Single-Sided Tape - 75mm x 25m

The primary purpose is to create an airtight and watertight seal at overlaps, penetrations, and junctions when used with Tyvek breather membranes and vapor control layers, contributing to a durable and energy-efficient building envelope.

While designed for Tyvek membranes, it can adhere to other compatible building wrap materials and substrates like timber and metal, provided the surfaces are clean and dry. However, performance guarantees are specific to Tyvek products.

The tape offers temperature resistance from -40°C to +100°C. The high-tack adhesive is designed to bond well even in low-temperature application conditions.

The tape is 75mm wide and comes on a 25m roll.

Yes, the tape is UV-resistant and designed to provide durable, long-term seals within the building envelope, protecting against external elements.

Ensure surfaces are clean and dry. Apply firm pressure during installation, and use a roller over the taped area to maximize adhesive contact and create a permanent bond.

Yes, it can be used for DIY projects where sealing building membranes or creating airtight/watertight seals is required, provided the application surfaces are prepared correctly.

Ensure the application surface is clean, dry, and free from dust, grease, or moisture. Surface temperature may also be a factor; ensure it is within the recommended application range. Press firmly and use a roller to ensure full contact.

Ensure the tape has not been stored in excessively cold conditions, which can make the adhesive stiff. If the liner is difficult to start, carefully use a clean blade to lift an edge.

Verify that the correct tape was used for the specific membrane and substrate. Check for potential exposure to UV light or moisture that may degrade the seal. Ensure the initial application was thorough and consistent pressure was applied.