Makita - DUH651Z - Hedge Trimmer
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Makita DUH651Z is a cordless hedge trimmer designed for landscaping professionals and serious home gardeners seeking efficient and quiet hedge maintenance. Its key benefit is the powerful, battery-operated performance combined with extremely low noise levels, allowing for work in noise-sensitive environments. A key caveat is that this is a bare tool, requiring separate purchase of batteries and a charger.
All features
| Model Part Number | DUH651Z |
|---|---|
| Brand | Makita |
Extended Product Information
FAQs
What batteries are required for the Makita DUH651Z?
The Makita DUH651Z requires two Makita 18V LXT Li-ion batteries to operate.
Does this product come with batteries and a charger?
No, this is a bare tool and does not include batteries or a charger. These must be purchased separately.
What is the maximum branch thickness this trimmer can cut?
The trimmer is designed to cut branches up to approximately 1.8 cm (0.7 inches) in diameter.
How do I adjust the cutting speed?
The speed is adjusted using the variable speed control dial located on the handle. Rotate the dial to increase or decrease the no-load stroke rate.
How often should I lubricate the blades?
It is recommended to lubricate the blades after each use, once they have been cleaned, to maintain performance and prevent rust.
What does XPT stand for?
XPT stands for eXtreme Protection Technology, which provides enhanced resistance to dust and water ingress, making the tool more durable in harsh conditions.
What is the warranty period for Makita tools?
Makita typically offers a warranty on their tools. Please refer to the official Makita warranty documentation for the specific terms and duration applicable to this model in your region.
Troubleshooting
Hedge trimmer will not start
Ensure both 18V batteries are fully charged and correctly inserted. Check that the safety lock-off lever is engaged and the trigger is pulled fully. Verify the battery capacity warning lamp is not illuminated.
Blades are not cutting cleanly or are binding
Clean the blades thoroughly and apply lubricant. Ensure the cutting material does not exceed the maximum branch thickness the trimmer can handle (approx. 1.8 cm). Check for any obstructions between the blades.
Reduced cutting power
Check battery charge levels; replace or recharge batteries as needed. Ensure blades are sharp and free of debris. Verify that the speed control is set appropriately for the task.
Tool stops during use
This could be due to low battery charge, overheating, or engaging the battery capacity warning lamp. Allow the tool to cool if hot, check battery levels, and ensure batteries are properly seated.
Pros and Cons
Pros
- Powerful cordless operation with dual 18V batteries.
- Significantly quieter than gas-powered trimmers.
- Ergonomic design with a rotating rear handle for comfort.
- Variable speed control for precision and versatility.
- Durable construction with XPT for environmental protection.
Cons
- Batteries and charger not included (bare tool).
- Can be heavier than smaller, single-battery models due to the dual battery system.
- Requires investment in compatible 18V LXT batteries and a charger if not already owned.
- 5.2 kg weight might be fatiguing for extended use for some users.
Setup, Compatibility & Care
Setup:
- Insert Batteries: Ensure you have two compatible Makita 18V LXT Li-ion batteries. Slide them into the designated battery ports until they click into place.
- Power On: Locate the main power switch or trigger lock. Ensure the safety lock-off lever is engaged before pulling the trigger to start the tool.
Compatibility:
- This tool is compatible with all Makita 18V LXT Li-ion batteries.
- Refer to the battery manufacturer's guidelines for optimal charging and storage.
Care:
- Blade Maintenance: After each use, clean the blades with a dry cloth to remove sap and debris. Apply a light coat of lubricating oil to prevent rust and ensure smooth operation. Never store the tool with blades exposed; use a blade cover.
- Cleaning the Body: Wipe the tool's exterior with a damp cloth. Do not use solvents or immerse the tool in water.
- Storage: Store the hedge trimmer in a dry, protected environment. Ensure batteries are removed before long-term storage.
- XPT Maintenance: Periodically check that vents are clear of debris to ensure the eXtreme Protection Technology can function effectively.