Best current price£111.17from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£111.17Visit shop Sealey Sa312 Air Riveter 3/16In Steel Aluminium & Stainless Steel Rivets
Visit shop
B&Q£130.52Visit shop - Sealey Air Riveter 3/16" Steel Aluminium & Stainless Steel Rivets Sa312
Visit shop15 offers from £111.17 - £149.94
View price history by clicking the chart icon.
This Sealey Air Riveter is designed for professionals and serious DIYers who need to efficiently install rivets in aluminum, steel, and stainless steel up to 3/16" diameter. Its key benefit lies in its pneumatic power, significantly speeding up assembly work compared to manual riveters. A minor caveat is the need for an air compressor to operate. This tool features a robust design with a hardened steel jaw assembly and a convenient trigger operation for ease of use in demanding applications.
| Model Part Number | SA312 |
|---|---|
| Brand | Sealey |
This Sealey Air Riveter is designed to handle aluminum, steel, and stainless steel rivets up to 3/16" (4.8mm) in diameter.
You need a standard air compressor capable of providing sufficient air pressure and volume for pneumatic tools. The specific requirements will depend on your compressor's output, but generally, a typical workshop compressor will suffice.
The tool is suitable for riveting aluminum, steel, and stainless steel materials.
The tool is supplied with two spanners. Use these to unscrew the old nozzle and securely screw on the new one appropriate for your rivet size.
While it is a professional-grade tool, its trigger operation is straightforward. However, understanding air tool operation and safety is recommended. It is significantly easier to use than a manual riveter for repeated tasks.
Regularly clean the exterior and jaw assembly. Ensure connections are secure. Periodic lubrication of the air inlet may be required as per standard air tool maintenance practices. Store in a dry place.
No, the air hose and compressor are typically sold separately. This tool requires connection to an existing pneumatic air supply.
Check air pressure from the compressor; ensure it's within the tool's operating range. Verify the correct nozzle is installed for the rivet size. Inspect the jaw assembly for wear or debris and clean if necessary.
Ensure all air line connections are secure. Check for damage to the air hose or tool's air inlet. Inspect O-rings and seals for wear and replace if needed.
Ensure the correct nozzle is used for the rivet size. Check that the rivet is fully seated in the nozzle. If the issue persists, the jaw assembly may require inspection or maintenance.
Confirm adequate air supply and pressure. Clean the trigger mechanism and internal components if they appear obstructed. Refer to the manufacturer's maintenance guide for lubrication points.
Setup: To set up the Sealey Air Riveter, connect it to a suitable air compressor using an appropriate air hose. Ensure the compressor is turned off before connecting. Once connected, turn on the compressor and set the air pressure according to the tool's requirements (refer to manual if available). Select the correct nozzle size for your rivet diameter and install it onto the tool. Insert a rivet into the nozzle.
Compatibility: This tool is designed for use with standard pneumatic air lines and compressors. It is compatible with aluminum, steel, and stainless steel rivets up to 3/16" (4.8mm) in diameter. Ensure your air compressor can supply the necessary air flow and pressure for optimal performance.
Care: After each use, disconnect the air supply. Clean the exterior of the riveter with a dry or slightly damp cloth. Periodically check the jaw assembly for debris and clean if necessary. Store the tool in a clean, dry environment. Regular lubrication of the air inlet may be beneficial as per general air tool maintenance guidelines.
