Noblessa Pebblis Window Film - White
Best current price£18.97from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£18.97Visit shop - Noblessa Pebblis 90Cm X 1.5M Premium Static Cling Window Film For Privacy And Décor
Visit shopB&Q£18.97Visit shop One Offer
1 offer from £18.97
View price history by clicking the chart icon.
B&Q - Noblessa Pebblis 90Cm X 1.5M Premium Static Cling Window Film For Privacy And Décor
Free delivery in 1–3 days
£18.97
Visit shop
Product Information
Full details
The HexGuard Noblessa Pebblis Window Film is a DIY solution for enhancing privacy and décor on glass surfaces like windows, doors, and shower screens. It offers 95% UV protection to prevent fading and reduce glare without obstructing light, making it ideal for homeowners, tenants, and landlords seeking a cost-effective and easily applicable alternative to blinds or curtains. While simple to apply and remove without residue, it requires careful adherence to edge spacing and surface preparation to ensure longevity.
All features
| Colour | White |
|---|---|
| Model Part Number | 305-5211 |
| Brand | HexGuard |
Extended Product Information
FAQs
How do I clean the Noblessa Pebblis Window Film?
You can clean the film with a soft cloth and mild household cleaners. Wipe up spills immediately to prevent staining.
Can I reuse this window film?
Yes, the film is reusable. As long as it is removed carefully without damaging the static cling properties, it can be reapplied.
What is the recommended gap from the window seal?
It is recommended to maintain a 2mm to 5mm gap from any window seal to prevent the film from lifting over time.
Does this film block light completely?
No, the film reduces glare and blocks 95% of UV rays but does not block natural light. It allows light to pass through while providing privacy and protection.
What surfaces can I apply this film to?
This film is designed for clean, smooth, non-porous glass surfaces such as windows, glass doors, and shower screens.
How do I remove the film if I want to change it?
Simply peel the film away from the glass. If there is any residue, it can typically be removed with a damp cloth and mild soap.
What is the warranty period for this product?
The Noblessa Pebblis Window Film comes with a 1-year guarantee.
Troubleshooting
Film won't adhere to the glass
Ensure the glass is thoroughly cleaned and generously sprayed with water. Re-wet the glass and the static side of the film before reapplying. Check if the clear backing film was fully removed.
Air bubbles or water trapped under the film
Use a smoother or squeegee to push out air and water towards the edges. If persistent bubbles remain, gently peel back the film to that section and re-smooth.
Film edges are lifting
Ensure a 2mm to 5mm gap is maintained between the film and any window seals or frames. Re-wet the area and smooth down firmly. If the issue persists, the film may need to be trimmed slightly.
Film appears cloudy or streaky after application
This is often due to residual water or cleaning solution. Allow the film to dry completely. If streaks persist, clean gently with a damp cloth and mild soap, then rinse with clean water and squeegee dry.
Pros and Cons
Pros
- Non-permanent and leaves no residue upon removal
- Easy to apply and reposition during installation
- Provides significant UV protection and glare reduction
- Cost-effective alternative to blinds and curtains
- Reusable and durable for long-term use
- Enhances privacy and adds decorative appeal
Cons
- Requires careful application to avoid air bubbles and ensure proper adhesion
- Must maintain a small gap from window seals to prevent lifting
- Effectiveness may vary on textured or non-smooth glass surfaces
- Cleaning requires immediate wipe-up of spills to prevent staining
- Not suitable for exterior window application
Setup, Compatibility & Care
Setup:
- Ensure the glass surface is clean, smooth, and free of dust or debris.
- Measure and cut the film to the desired size, allowing for a small gap.
- Remove the clear backing film from the static cling side.
- Generously spray the glass surface with water.
- Apply the film to the glass, static side down.
- Use a smoother or squeegee to remove air bubbles and excess water from the center outwards.
- Ensure a 2mm to 5mm gap is maintained from window seals to prevent lifting.
Compatibility:
- Suitable for clean, smooth, non-porous glass surfaces only.
- Ideal for interior windows, glass doors, and shower screens.
- Not recommended for exterior window application.
Care:
- Clean using a soft cloth with mild household cleaners.
- Wipe up spills immediately to avoid staining.
- Avoid abrasive cleaners or tools that could scratch the surface.