Best current price£5.63from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.63Visit shop Power Cord Uk Plug To Right Angle Figure 8 Lead Cable C7 0.5M White 5055383480968
Visit shop
B&Q£6.11Visit shop B&Q - Power Cord Uk Plug To Right Angle Figure 8 Lead Cable C7 0.5M White
Visit shop3 offers from £5.63 - £6.11
View price history by clicking the chart icon.
This kenable right-angle Figure 8 C7 power cord is designed for users needing to connect devices in confined spaces, such as behind furniture or wall-mounted TVs. Its primary benefit is its compact design, allowing devices to sit closer to walls, but a caveat is its fixed 0.5m length, which may limit placement options for some setups. It provides a reliable power connection from a UK mains plug to a C7 (Figure 8) socket, featuring a durable, moulded construction with an integrated 3A fuse for safety.
| Model Part Number | 008096 |
|---|---|
| Brand | kenable |
The right angle refers to the 90-degree bend in the Figure 8 (C7) connector. This allows the cable to plug into a device in a way that it lies flat against the surface behind the device, rather than sticking straight out.
A C7 connector, often referred to as a 'Figure 8' connector due to its shape, is a two-pin AC power connector used for low-power devices such as some laptops, monitors, and audio equipment.
This cable is rated for 3A at 240V AC, which is suitable for most small to medium-sized electronics. Always check your device's power requirements.
It depends on the specific model. Many modern gaming consoles use a C7 input. Please check your console's power port to confirm it is a Figure 8 (C7) socket.
No, this lead is non-rewireable and fully moulded. The 3A fuse is integrated and not designed to be user-replaceable. If the fuse blows, the entire cable should be replaced.
The cable length is 0.5 meters (approximately 50cm).
The right-angle connector protrudes approximately 2cm from the device when plugged in.
Ensure the UK plug is fully inserted into the mains socket and the C7 connector is firmly seated in the device. Check that the mains socket is working with another appliance. Verify the device's power requirement does not exceed the 3A rating.
Check for any kinks or damage to the cable. Ensure connectors are clean and securely plugged in. If the issue persists, the cable may be faulty and should be replaced.
A slightly warm cable is normal under load. If the cable becomes excessively hot, immediately disconnect the device and the plug from the mains. Check the device's power consumption; if it exceeds 3A, use a higher-rated cable or power supply. Inspect the cable for damage. If no obvious cause is found, replace the cable.
Setup: Simply plug the UK mains end into a suitable wall socket or power strip. Connect the 90-degree Figure 8 (C7) end into the corresponding power input on your device. Ensure both connections are secure before powering on the device.
Compatibility: This lead is compatible with any device featuring a standard IEC 60320 C7 (Figure 8) power input socket. It is designed for use with standard UK mains power (240V AC) and devices rated up to 3A.
Care: Keep the cable away from excessive heat, sharp objects, and liquids. Regularly inspect the cable and connectors for any signs of damage. Clean only with a dry or slightly damp cloth; do not use abrasive cleaners. Ensure the cable is fully disconnected from the mains power before cleaning.
