Best current price£7.11from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.11Visit shop B&Q - Pro Signal 6.35mm (1/4") Stereo Jack Plug To 2X Phono (Rca) Plugs Lead1M Black
Visit shop2 offers from £7.11
View price history by clicking the chart icon.
The Pro Signal 1m audio lead is designed for audio engineers, musicians, and home studio enthusiasts who need to bridge the gap between professional gear with 6.35mm inputs and consumer-grade audio equipment utilizing RCA connectors. It provides reliable, high-fidelity signal transmission thanks to its oxygen-free copper (OFC) construction, though the 1-meter length may limit reach in larger studio setups.
| Colour | Black |
|---|---|
| Model Part Number | PSG03070 |
| Brand | Pro Signal |
While the 6.35mm jack is a stereo plug, it uses the tip-ring-sleeve configuration to carry stereo signals to the two RCA plugs, rather than acting as a mono balanced cable.
This cable is designed for line-level audio equipment. It will not provide the necessary phantom power or preamp gain for a standard microphone.
Yes, it is constructed to minimize external interference and hum in line-level audio applications.
You can use an extension lead, but note that extending cables over long distances may introduce signal degradation or noise.
It refers to the total cable length, approximately 3.28 feet, measured from the end of the jack to the ends of the RCA plugs.
Check that all plugs are firmly seated and ensure no power cables are running parallel to the audio cable, which could induce interference.
Verify that both RCA plugs are fully connected and that the 6.35mm jack is a stereo-configured port rather than a mono input.
Inspect the cable for physical damage or sharp kinks and ensure the device ports are free of debris.
To set up the cable, ensure the 6.35mm jack is fully inserted into the stereo output of your audio source until a distinct click is felt. Connect the red RCA plug to the Right channel input and the white (or black) RCA plug to the Left channel input on your receiver or amplifier. To maintain the life of the cable, avoid bending the lead at sharp angles near the connector heads, as this can cause internal strain. Store the cable by looping it loosely in a coil; avoid tight wrapping around equipment, which can damage the shielding over time. Keep the connectors clean by wiping them with a dry, lint-free cloth if they accumulate dust or debris.
