Butyl Sealant Tape - Black - 10M x 75mm

This tape is suitable for a wide range of surfaces including metal, aluminum, steel, painted surfaces, plastics, concrete, wood, and glass.

The tape is 10 meters long.

The width of the tape is 75mm.

Yes, it provides a waterproof seal and is designed for various outdoor construction and repair applications like gutters, roofs, and panels.

Adhesion may be reduced in very cold temperatures. It is best to apply the tape in moderate temperatures (ideally above 10°C) and ensure surfaces are dry and clean.

Store the tape in its original packaging in a well-ventilated and dry room, away from direct sunlight and extreme temperatures.

A minimum overlap of 5 cm is recommended for continuous seals to ensure a watertight and airtight barrier.

Ensure the surface is thoroughly cleaned and dried before application. Remove all dust, grease, and moisture. Press the tape down firmly after application.

Apply the tape slowly and steadily, smoothing it out as you go. If bubbles are present, carefully lift the affected section and reapply, ensuring even pressure. Avoid stretching the tape excessively during application.

The tape is designed for strong initial adhesion. Minor adjustments can be made immediately after application with care, but significant repositioning may reduce its effectiveness. Plan the placement precisely before applying.

Check that the required 5 cm overlap was achieved between tape sections. Ensure all seams and edges are fully covered and pressed down firmly.